-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
STS Aftermarket Exhausts
- Thread starter jlemkow
- Start date
quickster47
New member
I have the Akraopovic on mine and love the sound. And the best thing is it fits perfect.
Carl
Carl
Last edited:
Colin
New member
Akrapovic and removed the baffles. Great tone, nice and deep, not too loud.
HMF now do a pipe for the RT/ST. I had one of their Performance Series on my previous RSS, thinking about getting one for my ST but I seem to have a lot of old Mufflers around already. 6 at last count lol
HMF now do a pipe for the RT/ST. I had one of their Performance Series on my previous RSS, thinking about getting one for my ST but I seem to have a lot of old Mufflers around already. 6 at last count lol
Last edited:
333Club
New member
Akrapovic, which one?
I heard an Akrapovic with the baffles removed and loved it. But, I see there are two different Akrapovic's for the ST's. Touring & Performance (I think there called) Any idea what the difference is?
I heard an Akrapovic with the baffles removed and loved it. But, I see there are two different Akrapovic's for the ST's. Touring & Performance (I think there called) Any idea what the difference is?
I just bought the TBR carbon fiber muffler set up for my 2013 Black ST, the directions are terrible, even the pictures are not clear! If you go to TBR web site and pull up the Spyder ST install instructions you will see them. I cannot get install #7 to fit, it shows the spacer you must use for the ST/RT and it says to (quote " Install supplied TBR spacer into OEM rubber grommet for ST " The problem is the spacer they show and give you for the ST will not fit into the OEM rubber grommet hole ! TBR instructions show a person simply pushing the spacer in, however, no matter how hard and long I tried I cannot get it in, it does not fit. And, without this spacer you cannot install the muffler hanger> Even a friend of mine who is a cert BRP Can Am Spyder mechanic can not get it to fit. This part in the kit that sells for $609.00 (good quality, but too much money, I only bought it cause it is the only one for the 13 St that is carbon fiber) must be wrong? All I can do at this point is wait till Monday and call TBR and try to find out what's up with this?
I also took of the Cat which gets super hot and I feel is part of the problem with the heat. Just take a look at Jim's (SmoothSpyder) photos he took of how hot it gets, it actually melted the power tip he had in his muffler!!! I believe he posted the photos of it on this site. Just a note here, the cat by-pass pipes made by Spyder Attitude ,one of our sponsors is well worth the $450.00, it was a perfect fit and the quality is very good, the bends are close to mandrell bends.
Colin
New member
From what I gathered it is pretty much cosmetic, The Touring, which I have is a little bigger and has bigger Carbon Fibre Shields, and the Sport is slightly smaller and a different shape. Couldnt get anyone to give me info on performance difference.
I went with the Touring as I prefer the shape of it over the Sports.
The sound is much deeper than most other aftermarket Mufflers and I love it. Just need to perform a little surgery on the "Cat" to help it a little.
Last edited:
Mets79ST2013
New member
Exhausts
I have Two Brothers Black series Carbon F. on my sts, love the sound but I had to take my bike to a Meineke store to get done since they did not fit the ST-S directions from Two brothers are horrible but good exhausts. Hope this help
I have Two Brothers Black series Carbon F. on my sts, love the sound but I had to take my bike to a Meineke store to get done since they did not fit the ST-S directions from Two brothers are horrible but good exhausts. Hope this help
Doug
New member
waiting
Have being trying to find out if the cannon exhaust is available for the ST-Limited, still waiting for an answer from my PM to you and my email sent to REVO CYCLE:dontknow:
Have being trying to find out if the cannon exhaust is available for the ST-Limited, still waiting for an answer from my PM to you and my email sent to REVO CYCLE:dontknow:
Only downside is the price.
quickster47
New member
spyder-dude
New member
I have an Akrapovic from my STS that I will be selling if it won't work on my new 2014 RTS which should be here by end of month. Send me a message if you are interested in it. It is in like new condition.
Thanks,
Shawn
Thanks,
Shawn
Colin
New member
It shouls just bolt straight on, as the RT and ST systems are the same.
capt.jim
Member
Here are the pic's of my melted 2 Bro's P1 powertip from my ST-S. The Cat puts out some serious heat, my next mod is the bypass. I will install an AFR meter at the same time as the bypass to see how the numbers are and to see how much the ECM will eventually compensate, enough I hope.
quickster47
New member
Wow Jim, that is really some serious heat to have caused that kind of damage.
Carl
Carl
capt.jim
Member
I couldn't believe it, that was after a few mile wide open blast. The next day I cranked it up and thought "man, my exhaust sure sounds strange today, I looked in there and seen the aluminum inside tube had melted and had tried to push itself out.
Similar threads
