Stock seat mod gas door

[MOSESS]

Yes, I added all the material just to be safe. Mike, you have been a great help. I was really afraid to do this mod but after watching you do a few of them, I felt better about my ability to get this done. I just want to thank you again. I wish there were more guys like you around. The next thing you may want to add here is your shock relocation mod. And please explain the benefits.

 

[ELguitarman62]

Just wanted to add a little bit of info and my experience installing my gas door. I marked my door holes, used a soldering iron to burn holes through the vinyl and foam, then drilled my holes. Once the holes were drilled I used 3/4 inch flat Allen wrench headed bolts with T nuts and mounted the door. With the door mounted, I used a utility knife to cut the vinyl and foam away, exposing the plastic of the seat. Instead of using a hole saw for my hole, I used a multi tool to cut the hole in the plastic. Then I used a Dremel tool to sand and round the small flat spots left from the multi tool. Worked great and was quick and flawless. Using a hole saw kind of scared me, afraid of it jerking and screwing the seat up. I've read about it happening. Hope this little info helps someone.