ST-L 2013 front tire PSI

[dadunston]

Has anyone tried setting their front tire PSI to 13? I heard this is the new number being tested by BRP to help alleviate the bouncy feeling when hitting bumps if you haven't requested that your shocks be replaced.

Just seeing if anyone had any experience with running this low.

 

[kubie]

I did set mine at 13psi but after Nancys toy suggested that I not go below the factory recommended psi on the front tire witch is 15 psi I raised it to 17 psi and I like it there!

 

[Chupaca]

Let's see..!!

there is a range and pretty much to each his own. You have to find what works for you. It will affect more than the bounce so be careful where you set it...:thumbup:

 

[SpyderAnn01]

If they will replace your shocks go for it. I had the shocks replaced on my 2013 RT and it made a huge difference. I'm running 18 psi in the front on mine and they seem to be wearing good and the handling is great with the addition of BajaRon sway bar. The rear tire, however, at 12,000 miles is being replaced this week.

 

[SpyderMouse22]

If they will replace your shocks go for it. I had the shocks replaced on my 2013 RT and it made a huge difference. I'm running 18 psi in the front on mine and they seem to be wearing good and the handling is great with the addition of BajaRon sway bar. The rear tire, however, at 12,000 miles is being replaced this week.

15 to 16 is working well for my ST L the RT is heavier than the ST L 18 lbs did not work to well for me