-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Spyderwindshields.com?
- Thread starter Lamonster
- Start date
dltang
Very Handy Member
As bjt noted, my F1 needed a little bit of sanding down on the bottom edge but when the EVO III arrived, it was perfect. I have heard nothing but positive results on the EVO III. You have to remember the original F! was the first aftermarket windshield for the Spyder, it was bound to go through some growing pains. Marcel has hit a homerun with the EVO III as far as I am concerned.
bjt
Very Helpful Member
He has that info on his website. Basically, you heat up the top lip of your F1 with a heat gun or two blow dryers. Once it's warm, you just pull the top of the lip towards the front of the Spyder just a bit to deflect the air more up and over your helmet.
SpydeeBite2
New member
We recieved our evolution III the day we picked up our :spyder: the dealer installed it for us and when I spoke to the guy that did the install he said he had to adjust two of the holes for fit. I am very happy with this windshield.:clap:
Similar threads
