Spyderpops Bump Skid for 2014 RTSE6

[Roadster Renovations]

I am really impressed with the Spyderpops' Bumpskid for our RTSE6! First, it was packaged so well that it took almost 10 minutes to get into it. When we finally got into the unit I was immediately impressed at how thick and substantial it was. With my bike up in the air, I was easily able to follow the very clear and simple instructions. When I pulled the OEM skid plate off I couldn't believe how flimsy and small it was. (see picture) Last month we had a close call around Rome, NY with a heavy duty tie down I couldn't avoid in the road. I am sure if I had had this skid plate, the bike would have been much better protected. In my opinion, the Baja Ron sway bar and Spyderpops heavy duty bump/skid should be the first two things a new spyder owner should get for their ryde. Many thanks to Spyderpops for offering such an excellent upgrade.

 

[jaherbst]

I am really impressed with the Spyderpops' Bumpskid for our RTSE6! First, it was packaged so well that it took almost 10 minutes to get into it. When we finally got into the unit I was immediately impressed at how thick and substantial it was. With my bike up in the air, I was easily able to follow the very clear and simple instructions. When I pulled the OEM skid plate off I couldn't believe how flimsy and small it was. (see picture) Last month we had a close call around Rome, NY with a heavy duty tie down I couldn't avoid in the road. I am sure if I had had this skid plate, the bike would have been much better protected. In my opinion, the Baja Ron sway bar and Spyderpops heavy duty bump/skid should be the first two things a new spyder owner should get for their ryde. Many thanks to Spyderpops for offering such an excellent upgrade.
View attachment 96658View attachment 96659View attachment 96660

Great products and good people. Had one installed on RT-S in front and the Rooster tail preventer on hitch. Also added Bump Skid on RT-622 trailer to keep from scratching up the rear bottom. All work fine as advertised.
All was installed by Harvey and Crew at Owners Event in Durango Colorado in less than 30 minutes.

Jack

 

[Bob Denman]

I showed this to The Missus... :shocked:


...And it's back on "The List" :yes:

 

[rnet]

In Stock Bob, Waiting for an appearance.

 

[gerard]

Yes, I absolutely agree...the original bumpskid is very small and light weight in comparison.
I too now have a bumpskid for the RT-622.

 

[zuni]

We added ours shortly after getting the bike. When I went to install I was surprised to find that I already had a few scratches on the underside. Happy for the extra protection. It also made for a nice place to add lighting both above and below. I routed a few channels on the bottom side to recess the leds and give them a little protection. I ran a strip above the skid plate between it and the body.

CJ JAX

 

[larryd]

Rooster tail preventer

Great products and good people. Had one installed on RT-S in front and the Rooster tail preventer on hitch. Also added Bump Skid on RT-622 trailer to keep from scratching up the rear bottom. All work fine as advertised.
All was installed by Harvey and Crew at Owners Event in Durango Colorado in less than 30 minutes.

Jack

What is a rooster tail preventer??? Who make it??? Picture???

Thanks, larryd

 

[SAR41]

I agree!!

After reading a lot here first, that was the very FIRST thing I installed on my new 2014 LTD. Very impressed with the thickness and the easy install. All the holes lined up perfect. THANKS SPYDERPOPS.

 

[Purple Guy]

I am really impressed with the Spyderpops' Bumpskid for our RTSE6! First, it was packaged so well that it took almost 10 minutes to get into it. When we finally got into the unit I was immediately impressed at how thick and substantial it was. With my bike up in the air, I was easily able to follow the very clear and simple instructions. When I pulled the OEM skid plate off I couldn't believe how flimsy and small it was. (see picture) Last month we had a close call around Rome, NY with a heavy duty tie down I couldn't avoid in the road. I am sure if I had had this skid plate, the bike would have been much better protected. In my opinion, the Baja Ron sway bar and Spyderpops heavy duty bump/skid should be the first two things a new spyder owner should get for their ryde. Many thanks to Spyderpops for offering such an excellent upgrade.
View attachment 96658View attachment 96659View attachment 96660

:agree:

They were the first 2 things I did to my Spyder. :thumbup:

 

[jaherbst]

What is a rooster tail preventer??? Who make it??? Picture???

Thanks, larryd

Fills in the space between the hitch and fender to prevent water from "rooster tailing" up onto the Spyder or passenger. It works!

Jack

 

[larryd]

WHO MAKES IT???

Fills in the space between the hitch and fender to prevent water from "rooster tailing" up onto the Spyder or passenger. It works!

Jack

WHO IS THE MANUFACTURE OR THE SOURCE FOR THIS "ROOSTER TAILING" GUARD/FLAP???

 

[Cruzr Joe]

WHO IS THE MANUFACTURE OR THE SOURCE FOR THIS "ROOSTER TAILING" GUARD/FLAP???

Spyderpops, on the home page or you can go to www.spyderpops.com

Cruzr Joe

 

[trikermutha]

explain how that prevents the rooster tail by installing the skid plate?? :banghead:

 

[IdahoMtnSpyder]

explain how that prevents the rooster tail by installing the skid plate?? :banghead:

It doesn't. They are two entirely different items.

 

[larryd]

Spyderpops, on the home page or you can go to www.spyderpops.com

Cruzr Joe

I looked on spyderpops site and don't see them listed...I'll give him a call...

"trikermurtha" We are NOT talking about the bump skids...We are talking about rear flaps that go between the hitch and the fender...

THANK YOU "Cruzr Joe"

 

[Cruzr Joe]

I looked on spyderpops site and don't see them listed...I'll give him a call...

"trikermurtha" We are NOT talking about the bump skids...We are talking about rear flaps that go between the hitch and the fender...

THANK YOU "Cruzr Joe"

My pleasure, his # is 501 627-4008

Cruzr Joe

 

[trikermutha]

NOw that I understand..:clap: Guess the topic got off subject and missed it half way down..:banghead:

 

[Roadster Renovations]

NOw that I understand..:clap: Guess the topic got off subject and missed it half way down..:banghead:

That tends to happen a lot around here......you get used to it!

 

[M109Dreamer]

That is one sweet Spyder lift you have. I would never go inside.

 

[Roadster Renovations]

pps: Thanks! We lifted a friends 2010 RTS the other day and replaced a sway bar link in 5 minutes. He had never seen the complete bottom of his bike before.