Spring Spacers

[Dray]

I have a 2015 F3S and it has the front springs that have the adjustable
preload collars. I believe this to be standard on all of the 2015 F3S's. My question
is can I install the Polaris rubber spacers between the coils to tighten up the front suspension?
I assume that I can play with the adjustment on the preload to get a setting
that I am happy with. Also, does anyone have a .com address for Doc Humphreys?
I have heard that he has medal spacers that work pretty well.
Opinions appreciated!!

Dray:yes::banghead::yes:

 

[BLUEKNIGHT911]

SPACERS

:hun: .... The reason for the SPACERS ..... is to firm-up the NON-ADJUSTABLE SHOCKS .......yours are ADJUSTABLE !!!! .....But if you want to put them in :dontknow: ..............Mike :thumbup:

 

[Dray]

Thanks Mike, appreciated. Any thoughts as to how much adjustment I can make
without creating problems? I have already done a full turn which did not seem to
make any difference.

Dray

 

[BLUEKNIGHT911]

ADJUSTMENT

Thanks Mike, appreciated. Any thoughts as to how much adjustment I can make
without creating problems? I have already done a full turn which did not seem to
make any difference.

Dray

Well I wouldn't use the term PROBLEM when discussing what the suspension is going to feel like :thumbup::thumbup::thumbup:.......It is going to feel different / changed etc.......OK........The entire range they have built into your SHOCK is an acceptable amount .....either full soft or full firm .........You will determine what works best by EXPERIMENTING ,.....Nothing BAD is going to happen at any setting.........It will just feel different ......So my advice is work with it until you find a happy spot............If you don't have a BAJARON sway bar you may want to consider that .....A sway bar does things the shocks really don't .....Ask Ron about it ......Mike :thumbup:

 

[CarolinaSpyderRyder]

I adjusted my RS-S about as stiff as they get, that's where i like it. Some people like them softer, it rides great.

 

[rpatsh]

will those spacers work on the rear shock to stiffen it up?

 

[Roadster Renovations]

You can send me a PM here if you want.

I have a 2015 F3S and it has the front springs that have the adjustable
preload collars. I believe this to be standard on all of the 2015 F3S's. My question
is can I install the Polaris rubber spacers between the coils to tighten up the front suspension?
I assume that I can play with the adjustment on the preload to get a setting
that I am happy with. Also, does anyone have a .com address for Doc Humphreys?
I have heard that he has medal spacers that work pretty well.
Opinions appreciated!!

Dray:yes::banghead::yes:

 

[Chupaca]

Let's see....

Seems if your going to add that much to the spring you should be considering a better shock with a larger range or set up for your needs. With full adjustment and spring spacers you may get to a ridgid shock.....now that can beat you up...:roflblack: