Sport rack mounting hardware...

[Bullet24]

Does anyone know if you can buy replacement hardware for the sport rack? I am looking at getting a good deal on the sport rack, but it doesn't come with the mounting hardware. Any help will be much appreciated!

 

[mxz600]

Does anyone know if you can buy replacement hardware for the sport rack? I am looking at getting a good deal on the sport rack, but it doesn't come with the mounting hardware. Any help will be much appreciated!

Here is a link to a post for the same issue. And I would check with Cowtown to see about getting those parts.

http://www.spyderlovers.com/forums/showthread.php?t=19229&highlight=Sport+rack+parts

 

[dlycan2]

All that is missing are the bolts. You can buy better quality bolts at the hardware store. :thumbup:

 

[mxz600]

All that is missing are the bolts. You can buy better quality bolts at the hardware store. :thumbup:

He may also need the square nuts that slide into the aluminum block.

 

[dlycan2]

Good point! Should still be able to get at a good hardware store. I'm pretty sure this rack is on eBay. It also is missing the "plate".

:spyder:

 

[Bullet24]

I would imagine I need all mounting hardware, thats what the guy said. I will shoot a message to cowtown and see if the have the install kit readily available. Thanks :thumbup:

 

[NancysToy]

Most Spyder accessories do not have the parts available separately on the BRP parts system. There is likely a good reason that this thing is available on EvilBay. I wish you luck...but don't get your hopes up.

 

[wyliec]

Most Spyder accessories do not have the parts available separately on the BRP parts system. There is likely a good reason that this thing is available on EvilBay. I wish you luck...but don't get your hopes up.

:agree:
I have the BRP sport rack/back rest. Although the instructions give p/n's, they are not available for separate sale.

I needed a part for the sport rack and was standing right there when the dealer was talking to their BRP contact. BRP rep said if I needed the part that I'd have to buy the sport rack. The part I needed was the lower cover b/c I broke the screw tab.

 

[Bullet24]

:agree:
I have the BRP sport rack/back rest. Although the instructions give p/n's, they are not available for separate sale.

I needed a part for the sport rack and was standing right there when the dealer was talking to their BRP contact. BRP rep said if I needed the part that I'd have to buy the sport rack. The part I needed was the lower cover b/c I broke the screw tab.

Fortunately the only thing missing is the 5 install bolts. It has the plate and the clips and the long bolt and nut, just the other bolts it needs. I should be able to just go buy some grade 8 bolts with the same pattern from home depot or lowes I think.