Gutsplitter
New member
Any good ideas how to mount the mini-license I get in Idaho on the large license holder on the Freedom trailer????:sour:
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Small license on Freedom
- Thread starter Gutsplitter
- Start date
cptjam
Registered User
Plate
Buy a piece of 1"X1/8 aluminum at Home Depot. Buy fasteners. Cut aluminum to span the holes in the trailer. Put a couple of spacers behind the aluminum to allow the bolts for the plate to not hit the trailer body. Drill 4 holes. Bolt everything together, starting with the plate on the aluminum. Then bolt the whole assembly to the trailer. Paint or polish aluminum to look nice.
Buy a piece of 1"X1/8 aluminum at Home Depot. Buy fasteners. Cut aluminum to span the holes in the trailer. Put a couple of spacers behind the aluminum to allow the bolts for the plate to not hit the trailer body. Drill 4 holes. Bolt everything together, starting with the plate on the aluminum. Then bolt the whole assembly to the trailer. Paint or polish aluminum to look nice.
SpyderAnn01
Active member
We stopped at our dealer and they have this for off road CanAm. Holes
placed for large or small plates.
placed for large or small plates.Similar threads
