BajaRon
Well-known member
Ok sports fans and SpyderLovers Everywhere! I FINALLY have the promised Shock Adjusters in my hand, ready to ship. Yes, they are very late. 
pps:
They come in 2 colors, as you can see. They will arrive without the BajaRon decals attached. You can use the decal of your choice or no decal at all if you prefer.
Details Below.
Adjusters come in Red or Silver (though in the picture they almost look white)
Adjuster Kit Contains
1- Pair of Billet Aluminum Shock Spring Pre-Adjusters
1- Spanner Wrench
1- Set each, both colors of BajaRon Decals (Multi-Color & Black/Silver)
1- Set Rub Washers (Not Shown)
1- Strip of Double Sided Sticky Tape (Assists in Assembly) (Not Shown)
1- Set of Installation Instructions - Non-Tupperware Removal Method.
Price Delivered to US and Puerto Rico * $185.00
Will Ship Worldwide - Contact me for International shipping cost.
If you are going to install these yourself you will need a set of spring compressors. Universal sets are pretty readily available and can sometimes be rented/borrowed from your local auto parts store. However, they can be too large for the smaller springs on the Spyder. Motorcycle versions are usually too weak to do a good job.
I have custom Spring Compressors available. These will be offered on a deposit basis. If you need the spring compressors there will be an additional $25.00 deposit above the cost of the Adjuster Kit. This deposit will be fully refundable upon return of the compressors in serviceable condition. Or, you can keep them if you like.
Though it makes the install easier if you pull Tupperware. These Adjusters can be installed without pulling anything off other than the shocks.
As always, you can email me at [email protected] or PM me here at Spyderlovers.com
pps:They come in 2 colors, as you can see. They will arrive without the BajaRon decals attached. You can use the decal of your choice or no decal at all if you prefer.
Details Below.
Adjusters come in Red or Silver (though in the picture they almost look white)
Adjuster Kit Contains
1- Pair of Billet Aluminum Shock Spring Pre-Adjusters
1- Spanner Wrench
1- Set each, both colors of BajaRon Decals (Multi-Color & Black/Silver)
1- Set Rub Washers (Not Shown)
1- Strip of Double Sided Sticky Tape (Assists in Assembly) (Not Shown)
1- Set of Installation Instructions - Non-Tupperware Removal Method.
Price Delivered to US and Puerto Rico * $185.00
Will Ship Worldwide - Contact me for International shipping cost.
If you are going to install these yourself you will need a set of spring compressors. Universal sets are pretty readily available and can sometimes be rented/borrowed from your local auto parts store. However, they can be too large for the smaller springs on the Spyder. Motorcycle versions are usually too weak to do a good job.
I have custom Spring Compressors available. These will be offered on a deposit basis. If you need the spring compressors there will be an additional $25.00 deposit above the cost of the Adjuster Kit. This deposit will be fully refundable upon return of the compressors in serviceable condition. Or, you can keep them if you like.
Though it makes the install easier if you pull Tupperware. These Adjusters can be installed without pulling anything off other than the shocks.
As always, you can email me at [email protected] or PM me here at Spyderlovers.com
ray: Tom :spyder:
