Shad luggage for the F3

[JKMSPYDER]

SHAD LUGGAGE

To Retired 2012 can you give us the model # of the bags you have and where you bought them? Was it from a dealer or direct from SHAD?

 

[Retired 2012]

Ok, they are already listed in this thread, but here they are again.
219400721 bags and 219400728 mounting brackets I also got the bag liners.
I bought from ImotorSports.com tell them you are a SpyderLover for a discount.
Hope this helps....

 

[monkeyboymorton]

Some photos here from the UK with side and rear shot. Note reflector would be red for your country, rather than the amber for UK:

https://www.facebook.com/photo.php?fbid=1723964761191144&set=pcb.1027625530650852&type=3&theater

 

[VinnyMac]

How hard is it to take the braket off when not using the shad bags dont like thr look of the braket but love the bags

 

[Retired 2012]

4 screws on each side, but you won't even worry about it once there on, good looking bracket blends in well

 

[VinnyMac]

Still comfy for the passenger plenty of leg room?

 

[KID Ryker]

Givi

My understanding is BRP and GIVI had a bad breakup. What a shame they already had some nice looking bags.
Then BPP brings out there own junk IMHO. Just sayin

Maybe Givi will start selling there brackets:yes: for the f3 like the police model.:yes:

 

[Retired 2012]

Yes, no interference with wife's legs

i was told Givi and Can-am no longer have a working relationship....
some here have modified the wing rack with great results, top case and side cases are then bought from Givi....
Either way it is nice to have some lockable storage for my helmet

 

[MrBones]

Viking and ultimate + corbin also make bags for the F3

 

[VinnyMac]

decided to go with the shad bags im also getting my 2016 f3s delivered today at 4 pm!!! ' first time spyder owner'

 

[Tazzel]

Viking and ultimate + corbin also make bags for the F3

I was told that the Viking bags have to be modified to fit on the F3 easy bracket. Is that true?? Shads are nice but to bubbly for me.

 

[TechnoTherapist]

4 screws on each side, but you won't even worry about it once there on, good looking bracket blends in well

OLD THREAD REVIVAL!!!

I very clearly see the four screws on each side that have to be removed to remove the brackets if you don't want them on the spyder. (on page three of this thread) That being said, the two that screw into the underside of the frame (not up at the grab rails), I'm guessing there's a plate that is inserted from the other side that these screw into. If the bracket is removed, does that plate stay in place on it's own or will it have to be removed also?

I like these, but I only use my bags when I absolutely need them and I like easily removable brackets so NOTHING is showing when I take them off.

Thanks for your time and consideration.

Cy

 

[monkeyboymorton]

I'm guessing there's a plate that is inserted from the other side that these screw into. If the bracket is removed, does that plate stay in place on it's own or will it have to be removed also?

You're making me cast my mind back 2 years to when I fitted these, but if I remember correctly those plates are only held in place by the bolts that hold the brackets on. The bolts go through holes in the frame so the plates would just come off when the brackets come off. Have to enlarge some holes in the undertray (on the euro model at least) with a step drill but that wouldn't be noticeable with the brackets off.

As to adding and removing the brackets I personally wouldn't want to do it on a regular basis but like anything, you'd be quicker at it 2nd, 3rd time round. Probably only take 5-10 mins a side with practice and tools to hand.

 

[jcthorne]

Has anyone with the Shad side bags added the matching top case?

 

[tomand]

I have an F3T so have BRP side bags but bought the Shad 58X and mounted it to my baker rear rack. fits great and easy install.

 

[monkeyboymorton]

Has anyone with the Shad side bags added the matching top case?

I would have by now but SHAD have gone very quiet on their top box mount for the F3-S. The contact at SHAD I was e-mailing kept saying 'coming soon' but now he's stopped responding to my e-mails. Makes me think they've abandoned it which is a shame.

I was going to fit an SH58X as well - looks like a great top box which can be a passenger back rest as well if mounted solidly enough.

 

[juscuz]

Has anyone with the Shad side bags added the matching top case?

I have the shad side cases with the matching SH58X top case mounted on the baker built luggage rack on my 2015 F3s. Turned out okay. Good support for the wife and can store two full size helmets plus other items in the full raised position. Leaves side cases and front trunk free for stuff.

 

[monkeyboymorton]

I have the shad side cases with the matching SH58X top case mounted on the baker built luggage rack on my 2015 F3s. Turned out okay. Good support for the wife and can store two full size helmets plus other items in the full raised position. Leaves side cases and front trunk free for stuff.

Sounds good - can you post some pictures of it mounted? I would be interested to see what it looks like. Thanks.

 

[juscuz]

Sounds good - can you post some pictures of it mounted? I would be interested to see what it looks like. Thanks.

Here ya go. Pictured is the mid height position. Goes up to third position for two full sized helmets.

 

[foxtail1]

Here ya go. Pictured is the mid height position. Goes up to third position for two full sized helmets.View attachment 157166

Thanks for this! That combo is exactly the kind of thing I've been looking for. Next farkles lined up!

One question: where are people buying Shad products? I was looking for the SH58X and I don't see any dealers in my area.