Service manual - need wiring diag for radio plug on 2011 RT?

[Partsguy]

Any one have a pdf of the wires coming into the plug for the radio on a 2011 RT
Under the seat

 

[IdahoMtnSpyder]

Any one have a pdf of the wires coming into the plug for the radio on a 2011 RT
Under the seat

Which plug? There are two of them on the radio. What particular info are you after?

Consider getting your own copy of the service manual. It's about $25 to $30 at www.canammanuals.com. Well worth the investment. The wiring diagram won't have a sketch of the plug with the pinout identified but it does show you the pin numbering convention used for the plugs and the pin number for each of the wires.

 

[Partsguy]

Its the one on the right
My bike only has one plug to it
The other port is covered

 

[IdahoMtnSpyder]

Its the one on the right
My bike only has one plug to it
The other port is covered

What are you looking to do? Some of the wires connect to the CanBus which is what is used to control things like station selection and volume. Others go to the speakers.

 

[Partsguy]

Just need to see which wires are for the speakers.
Hooking up a sound system with its own
Volume control

 

[Snowbelt Spyder]

Just need to see which wires are for the speakers.
Hooking up a sound system with its own
Volume control

Will this get you what you need? If not, we can work on something bigger.

 

[Partsguy]

Thanks Doug
Gonna have a look and see if I can make sense of the colors
Really appreciate it

 

[IdahoMtnSpyder]

This should help you out also. It's not the radio pinout but the numbering convention should be the same.