Seat Spacer Size?

[Tango]

I need to buy 2 seat spacers for the bolts. Anyone have the size needed? :dontknow: Want to go to Home Depot or Lowes to pick them up. And no, I don't have the originals. pps: Thanks. :thumbup: Tom :trike:

 

[Cruzr Joe]

I need to buy 2 seat spacers for the bolts. Anyone have the size needed? :dontknow: Want to go to Home Depot or Lowes to pick them up. And no, I don't have the originals. pps: Thanks. :thumbup: Tom :trike:

Tango

What are seat spacers??

Cruzr Joe

 

[Bob Denman]

Hi Tom,
I not sure which part you're looking for...
Here's a link to the BRP parts catalog
http://epc.brp.com/SiteMods/BRP_Pub...e-73d3-4dc4-8f01-09c5770d5131&brands=roadster

They have a seciton marked "Seat", for the 2014 RT.

Saturday morning at Ron's? :2thumbs:

 

[Chupaca]

Try this..!!

http://www.cheapcycleparts.com/oemparts/a/cam/52a5f618f870027104d4a6f8/seat-29y1401 item 21 is a spacer on the rear of the seat. But no size given maybe in the shop manual...don't have one. But can you measure it and get one larger so you can grind it to size..??..:dontknow:

 

[Tango]

Tango

What are seat spacers??

Cruzr Joe

The rear bolts on the seat need 2 spacers. The bolts slide through the spacers to the nuts. :thumbup: Tom :trike:

 

[Tango]

Hi Tom,
I not sure which part you're looking for...
Here's a link to the BRP parts catalog
http://epc.brp.com/SiteMods/BRP_Pub...e-73d3-4dc4-8f01-09c5770d5131&brands=roadster

They have a seciton marked "Seat", for the 2014 RT.

Saturday morning at Ron's? :2thumbs:

Bob, Ron hasn't got back to me. :dontknow: I have it penciled in. :thumbup: Tom :trike:

 

[Bob Denman]

:thumbup: Mike is bringing some folks down from Vermont. :thumbup:
I'll bring Donuts...:yes:

 

[Tango]

:thumbup: Mike is bringing some folks down from Vermont. :thumbup:
I'll bring Donuts...:yes:

Have you spoken to Ron? I know that Mike wants to go also. Have wanted to meet up with Mike for some time now. :thumbup: Donuts? Sounds good to me. hyea: Tom :trike:

 

[Cruzr Joe]

:thumbup: Mike is bringing some folks down from Vermont. :thumbup:
I'll bring Donuts...:yes:

DONUTS ?????????????????? Where, why was i not invited, :hun: I like DONUTS. :thumbup::thumbup:


Cruzr Joe

 

[Bob Denman]

If you leave now... we've got a spare bedroom available! :2thumbs:
Family doesn't need invitations; they show up!

 

[Tango]

DONUTS ?????????????????? Where, why was i not invited, :hun: I like DONUTS. :thumbup::thumbup:


Cruzr Joe

Come on up Joe. :2thumbs: We got room for you. Just don't touch our donuts! :lecturef_smilie: Some retired LEO's will be there. :cheers: Tom :trike:

 

[PW2013STL]

To bad you did not post this question yesterday as I switched seats last night and I could have mesured them for you. I could mesure the seat opening and the bolt size tonight that should give to the size spacer needed.

 

[Tango]

ID .255"
OD .442"
OAL 1.313"

or
6.61mm
11.27mm
33.37mm

I would suggest they are not metric and are nominal 1/4" ID x 7/16" OD x 1 5/16" OAL

If the nuts and bolts are missing, the nuts are not special, but they do live in a special wrenchless holder that slides in the anchoring track.

PK

THANK YOU- THANK YOU! :bowdown: Appreciate it! :thumbup: Tom :trike: