Screw bit to fit RT panels screws, where to find them.

[burg650]

I am asking for a friend. The screws that hold on the panels on the RT are a bit different form the RS, don't know what they are called but they have a hole in the middle to fit in the screws. Where can you find these to remove the RT panels?

 

[burg650]

His RT has many of them that holds on panels he wants to remove, what are they called.

 

[Highwayman2013]

I got a set at Harbor Freight. I call them torx with a hole. Thought I needed them for my 2012 but like Roger said they don't come out. Regular torx for most with some allen. Saw on another post they are anti tamper torx or security torx. Google to find a store near you.

 

[shelbydave]

Most of the panel screws are T-30 torx. The silver ones on the side of the RT (Where the 2 panels meet) are security screws that don't need to be removed. just pull on the panel, and they will come apart.

 

[Oldmanzues]

If you need the ones with the pin hole. I got mine at Sears. There are a lot of Habor Frieght around here as well.
Oldmanzues

 

[Ga Blue Knight]

If you loosen the security Torx screws on the side panels it will be very differcult to get the "Darts", that's what BRP calls them, to be oriented correctly.

 

[NancysToy]

Do not remove the silver security screws. They merely hold the pins that fit into the rubber grommets. Pulling the panel back releases the pins. The remainder of the panel fasteners are regular torx (black) and push rivets.