Scorpio SRi900 R wiring install

[whiteyron]

Can anyone please help me locate the plugs to connect to for the tail light adapter I have from Scorpio. I have a 2013 RT Limited. I have attached a few photos of the wire harness I have from Scorpio, this is suppose to be the factory adapter. I can not recognize the plugs. Thanks in advance for any help.ray:ray:ray:

 

[stevedfive]

I have the i900 on my 14' RTS and it didn't come with a harness. I spliced into the wires for the trailer lights under the seat. They do not make a wiring kit for the RT model, only the RS.

 

[whiteyron]

I have the i900 on my 14' RTS and it didn't come with a harness. I spliced into the wires for the trailer lights under the seat.

Thanks, never thought of those wires.:bowdown::bowdown:

 

[stevedfive]

Left turn - gray/pink
Right turn - brown/yellow
Left & Right taillight - orange
(middle picture)

This is for a 14' so you should verify the wires with a test light.

 

[Netminder]

I have the i900 on my 14' RTS and it didn't come with a harness. I spliced into the wires for the trailer lights under the seat. They do not make a wiring kit for the RT model, only the RS.

Did the same with mine, in fact looks very similar to where I placed my perimeter sensor also.

 

[whiteyron]

Harness

After further investigation, I found that the harness I bought from Scorpio is for a 2008 - 2013 RS not an RT. Anyone interested in the harness I will take $15 plus shipping, Scorpio will not accept a return, I paid $30. If interested, give me a shout. Thanks for all the replies.:bowdown::bowdown::bowdown: