Ryker 2up Tourer - Version 2020

[Geep]

its an original Can-Am product, I ordered it from my dealer ..(it is just in the rong catalgue )
four different colours - be carefull to get the same (adrenaline ?) if you order the RED .. the clamps are included ..
three different shields - I`m 176cm - 5 ft 10" the middle size is a little too high with the original seat, I do not want to look through the plexi ..
here you see from what modell you could use the handlebars - it is a 21mm Standard, like most of the motorcycles ( I use an old APRILIA one)
if you use wider handlebars the original mirrors "work" much better I do not change it now ..

first pic is with the highest shield - the red one is the lowest ..

https://can-am.brp.com/off-road/us/...luxe-fairing-for-g2-except-x-mr--6x6-g2l.html

How much air gets under the fairing and to the rider and passenger

 

[chris56]

not really much - the passenger will not feel it ..

 

[Geep]

Chris thanks for all the photos, which handlebar is this? A BRP or after market version?

 

[chris56]

Chris thanks for all the photos, which handlebar is this? A BRP or after market version?

you can use the one from the can-Am Outlander, mine is from a 10 year old "Aprilia Mille - Rotax V2" bike, also some others would work ..

I wanted to install the fairing as deep as possible, thats why i cutted the lid of the glovebox - you will find it out when you see some of the other Rykers which use this fairing now .. this here with the lower Sport-shield looks also great (too cold for me in the moment here in Austria)