Rubber Straps for mono seat cowling?

[Grizz]

Does anyone know where I can purchase the rubber straps that go to the mono cowling for the passenger seat? The first time I took it off, I broke 2 of the straps.

 

[effgjamis]

dealer

 

[LDFIREWORKS]

maybe a place like ace hardware?????????????????:thumbup:

 

[8LEGS]

Try this mod.
http://www.spyderlovers.com/forums/showthread.php?t=5488&highlight=rubber+broke

 

[M2Wild]

If I were you, I'd go by a couple of lobsters. Save that big rubber band from the claws. LOL

A dual purpose purchase.

 

[zzneonzz]

I would recomend using the velcro trick. I also broke 2 of mine the first time taking it off so i replaced them with velcro straps and it made life so much easier. Install time 30 seconds removal time 15 seconds. It took me 10 min to install using the rubber straps.

 

[rpdata]

What I did......

I also broke mine with 2wks. Take two bungiee coords and cut the ends off. Make a tight knot at each end (may have to cut a few times to get the proper length/tension)...but it works very well...i take mine off and on in seconds.

-rob

 

[Spydroe]

For sure go with the velcro straps, so easy and so fast.:yes:

 

[Peoriafirefighter]

Mono Straps

Does anyone know where I can purchase the rubber straps that go to the mono cowling for the passenger seat? The first time I took it off, I broke 2 of the straps.

I would also recommend the Velcro Straps. Very Easy on and off.:spyder2:

 

[SpyderDog65]

I would also recommend the Velcro Straps. Very Easy on and off.:spyder2:

can somone post a pic of this set up im confused on how it works i Freakin hate these dam crappy rubber tie downs brps supplys us with they absolutly SUCK i break at least one a week ive already went trough two packages of them in four months i would love a solution that would last alot longer than current one does thanks............Michael




Red SE5 6spoke rims,1inch riser,mono seatcover,venom exhaust by motad,nmn juicebox,nmn 8k HiD headlights,nmn tripleplay and fender tips lights,nmn extra brakelight,nmn carbon fiber se5 990 handlebar inserts,kury iso handgrips/throttleboss,kury iso footpegs,kewlmetal mirror ext,kelmetal spiderweb radiator hole insert,propad gelseatcushion.

 

[8LEGS]

http://www.spyderlovers.com/forums/showthread.php?t=5488&highlight=rubber+broke

The above link is to the thread on how to use the velcro.

 

[jodeg1945]

Probably a stupid question, BUT:

I'm thinking of getting a Corbin seat for my Spyder. Is it possible to get the mono seat cowl for the passenger portion and then just get the Corbin driver seat? OR does the mono seat cowl just cover the existing passenger seat?? I can't tell by the pictures.

Hope I'm not being TOO stupid! :banghead:

Thanks!

 

[bjt]

The mono seat cowl just fits on the existing passenger seat portion of the stock seat. If you are getting the Corbin seat, you have to get both the Corbin front and the Corbin rear seat. If you really wanted the BRP seat cowl and an upgraded seat, you could try a Russell seat and have them leave the passenger seat as stock. The BRP seat cowl should fit that setup just fine.

 

[NancysToy]

Probably a stupid question, BUT:

I'm thinking of getting a Corbin seat for my Spyder. Is it possible to get the mono seat cowl for the passenger portion and then just get the Corbin driver seat? OR does the mono seat cowl just cover the existing passenger seat?? I can't tell by the pictures.

Hope I'm not being TOO stupid! :banghead:

Thanks!

Seat cowl just covers the existing seat.
-Scotty

 

[crazycanuck]

The mono seat cowl just fits on the existing passenger seat portion of the stock seat. If you are getting the Corbin seat, you have to get both the Corbin front and the Corbin rear seat. If you really wanted the BRP seat cowl and an upgraded seat, you could try a Russell seat and have them leave the passenger seat as stock. The BRP seat cowl should fit that setup just fine.

so you mean I can't go to the Corbin warehouse and just ask for a driver seat to custom fit with the BRP mono seat cowl:dontknow:

 

[bjt]

I've never seen a Corbin seat on a Spyder that had only the front seat. Somebody who has installed a Corbin on their Spyder can certainly chime in on this but I believe that you must buy both the front and rear Corbin seats to mount them. :dontknow:

 

[crazycanuck]

I've never seen a Corbin seat on a Spyder that had only the front seat. Somebody who has installed a Corbin on their Spyder can certainly chime in on this but I believe that you must buy both the front and rear Corbin seats to mount them. :dontknow:

I would like to hear from others because that was (is) my plan to go get a custom corbin but keep the cowl on:shocked:


anyone:dontknow:

 

[bjt]

Ask lamonster, he'll tell you.

 

[NancysToy]

I think BJT's idea of contacting Russel to see if they can do it makes more sense.
-Scotty

 

[bjt]

crazycanuck, I found these in the archives....


http://www.spyderlovers.com/forums/showthread.php?t=6128

http://www.spyderlovers.com/forums/showpost.php?p=44274