• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

RTL 2020 Outdoor Cover - Is there a way to pack it in the zipper section?

i think the velcro piece at the back of the cover is where you open it for the antenna to come through an then close the velcro part back up tight around it. On my cover thats what the velcro opening is for on the back of cover. Dont know about the fitting in zippered part.
 
With the cover in the bike the male/female Velcro are in the back little lower than the trunk. It's not the antenna hole.

With the cover on the bike, you have to unzipper it so that it expands enough to fit over the trunk. I thought it may fold into itself in some way.

Hopefully someone has figured this out or bought a new one that came with instructions?

Thanks
 
Last edited by a moderator:
Enlarging the picture it appears to me to be a one piece jigsaw puzzle. Since the narrow portion of the cover is to the rear, in my mind the zipper bag portion is also to the rear, but I don't know. It has a flannel liner, so obviously one should be folding it inward, always keeping the liner innermost. Were I in your boots, I would lay it out on a floor or dry lawn and just begin folding options until you get to fit in the zipper bag part. My Firstgear rain jacket has one of those contraptions built into it. Good luck!
 
Photos are pretty self explanatory. I figured out the 2 velcro tabs on the rear, its to shrink the height with the trunk is off. Also shown is the top zippered area, unzipped it gives you extra room when the trunk is on. Those 2 plastic clips I do not know what for, the clip into each other and my thoughts are these must be someway that they are the to hold the cover when folded up.

I would like to hear from someone who actually owned one of these covers and how they are used. I can not find any instruction sheet online but I would imagine a new cover would of come with one.

If you do not own one of these, please do not reply.

Thanks all.
 

Attachments

  • P1180609.jpg
    P1180609.jpg
    69.7 KB · Views: 22
  • P1180614.jpg
    P1180614.jpg
    94.6 KB · Views: 22
  • P1180608.jpg
    P1180608.jpg
    71.1 KB · Views: 22
Last edited by a moderator:
Finally figured it out, if you turn the cover inside out you will see a storage bag attached to the cover.
So it has a built-in storage cover. Took a long time for me to discover this! hehe.
 
Last edited by a moderator:
Back
Top