-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
RT Vent Kit Installation Help
- Thread starter erua
- Start date
trikermutha
New member
Your will need the templates too. Someone will email the info. I know someone has them here.
Last edited by a moderator:
PM me with your email address and I'll send you the PDFs
TheCajun1957
New member
Sorry, I lost the files when my laptop died. When you get the files, read through them. TAKE YOUR TIME, think things thru, make sure before you cut. Its nerve racking to think about cutting the Tupperware. the other side goes a little easier.
Copperman
Active member
If you have the BRP part number go here: https://instructions.brp.com/e-instruction.html#tab=1&sku=710004533
You can print out the directions for the install.
You can print out the directions for the install.
Copperman
Active member
Yes. If you have the BRP part number put it in where it asks and you should get directions. On that page, scroll up a little and you'll see where to put it.
Revalden
New member
UtahPete sent the pics of his install. I put the Vent Kit on my 2015 and I'm VERY happy with the results. Now I don't get hot air coming up from the motor, and the Glove Box is cool enough that whatever you put in there isn't so hot you burn your hands. You don't need to cut a hole in the Tupperware, just remove the grill and everything will be hunkie dorie. Take all the parts out and fit them together on the kitchen table, they don't seem like they are compatable but keep trying until "The AH HA Moment". If there is a dealer near you that has been into Spyders from the git go, they might have the instructions in their files, ask, but remember the the Vents were for the 08-13 years. Good luck, and happy wrenching.
Eviltwin
New member
I'm not sure about that. Part of the what the vents do is to funnel much more air through the engine compartment and to do that they need larger openings than were originally made on the panels.
:agree:
Revalden
New member
Just removing the grill has worked very well around here, Oklahoma, in 100 deg heat even in stop an go traffic. Do whatever you want.
Revalden
New member
Bring your Spyder over here to Claremore, about 30 miles north of Tulsa off of hwy 44 exit 255 then right on hwy 20 east, then right turn onto 4170 rd. your gps will bring you here. PM to me if interested.
From amazon:
https://www.amazon.com/Can-Am-Spyder-Vent-Kit-219800388/dp/B079S6B78J
All install instructions here:
https://drag0n.mine.nu/index.php/s/QA8rE9Qm5x2EsYM
https://www.amazon.com/Can-Am-Spyder-Vent-Kit-219800388/dp/B079S6B78J
All install instructions here:
https://drag0n.mine.nu/index.php/s/QA8rE9Qm5x2EsYM
Similar threads
