PW2013STL
Active member
Drew
Shaft dia. = 1.063 from the step down which is 2.14
Shaft length from step down ( inside bearing outer race rides next to) to end = 3.338
Shaft length from step down to start of threads = 2.458
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
RT-622 Owners take note ... PUBLIC SERVICE NOTE
- Thread starter Cruzr Joe
- Start date
Drew
Shaft dia. = 1.063 from the step down which is 2.14
Shaft length from step down ( inside bearing outer race rides next to) to end = 3.338
Shaft length from step down to start of threads = 2.458
moorerandy
New member
RT-622 Trailer - replaced wheel bearing seal & added Bearing Buddy protectors
Thanks to all the discussion here about RT-622 trailer bearings and grease seals, I was motivated to inspect our trailer's wheel hubs and discovered a leaking grease seal on our 2013 Can-Am RT-622 trailer.
Replaced the leaking grease seal, repacked the wheel bearings with water-resistant grease, and added a set of Bearing Buddy trailer wheel bearing protectors. Following provides part number info for quick reference:
1.) Grease Seal (Aka: Oil Seal or Aka: Inner Dust Shield) - manufactured by Chicago Rawhide (as suggested by others --- I took the wheel hub to the NAPA Auto Parts store where we measured and confirmed the required grease seal part number):
NAPA Part Number: 14832 --- purchased from local NAPA Auto Parts store.
2.) Bearing Buddy - Stainless Steel trailer wheel bearing protector:
Model Number: 1980SS (Indicated to fit Outer Bearing Cone: L44649) --- purchased from local O'Reilly Auto Parts store.
Knott bearing number as depicted on trailer hub wheel bearings: L44649
3.) Bearing Buddy Bra (aka Extended Dust Cap):
Model Number: 19B (Indicated on Bearing Buddy package to fit Bearing Buddy Model 1980) --- purchased from local O'Reilly Auto Parts store.
Again thanks to our Spyderlovers discussion Forum --- I can only imagine that we have been spared from experiencing a trailer hub bearing failure somewhere down the road. Thank You & HooYah!
:clap::yes:
Thanks to all the discussion here about RT-622 trailer bearings and grease seals, I was motivated to inspect our trailer's wheel hubs and discovered a leaking grease seal on our 2013 Can-Am RT-622 trailer.
Replaced the leaking grease seal, repacked the wheel bearings with water-resistant grease, and added a set of Bearing Buddy trailer wheel bearing protectors. Following provides part number info for quick reference:
1.) Grease Seal (Aka: Oil Seal or Aka: Inner Dust Shield) - manufactured by Chicago Rawhide (as suggested by others --- I took the wheel hub to the NAPA Auto Parts store where we measured and confirmed the required grease seal part number):
NAPA Part Number: 14832 --- purchased from local NAPA Auto Parts store.
2.) Bearing Buddy - Stainless Steel trailer wheel bearing protector:
Model Number: 1980SS (Indicated to fit Outer Bearing Cone: L44649) --- purchased from local O'Reilly Auto Parts store.
Knott bearing number as depicted on trailer hub wheel bearings: L44649
3.) Bearing Buddy Bra (aka Extended Dust Cap):
Model Number: 19B (Indicated on Bearing Buddy package to fit Bearing Buddy Model 1980) --- purchased from local O'Reilly Auto Parts store.
Again thanks to our Spyderlovers discussion Forum --- I can only imagine that we have been spared from experiencing a trailer hub bearing failure somewhere down the road. Thank You & HooYah!
:clap::yes:
Attachments
cyclelover63
Member
thanks for the legwork!!!
jaherbst
New member
Similar threads
