SPYD3R
Active member
here i go again...
did a 2nd OEM Muffler Mod for my '09 RS...
Rev. 'A' was a gutted n short'n version, leaving the CAT in tacked...
Rev. 'B; is also gutted n short'n, but the CAT is gone south, and added a CHERRY BOMB Glass Pack to it... OAL is the same between both Rev's... pictures are worth a 1000 words, so here:





cut at both welds; fwd & aft... removed all inner hardware... gutted the CAT... welded the CHERRY BOMB to the CAT end... cut the end of the CHERRY BOMB just aft the weld on both ends... measured n cut body using the 'mounting strap' as a guide n marked with a pencil around the entire diameter to cut a straight line... cut the body to suit my required length, cut the inner core just shy of the outter body, cleaned up all the 'matting'... reinserted the inner core, and welded the body to fwd section... welded the 'aft' section on, cleaned, buffed n painted... mounted Rev. 'B' and VAROOOOOOM...... :bowdown: :clap: :yes: :thumbup:
did a 2nd OEM Muffler Mod for my '09 RS...
Rev. 'A' was a gutted n short'n version, leaving the CAT in tacked...
Rev. 'B; is also gutted n short'n, but the CAT is gone south, and added a CHERRY BOMB Glass Pack to it... OAL is the same between both Rev's... pictures are worth a 1000 words, so here:





cut at both welds; fwd & aft... removed all inner hardware... gutted the CAT... welded the CHERRY BOMB to the CAT end... cut the end of the CHERRY BOMB just aft the weld on both ends... measured n cut body using the 'mounting strap' as a guide n marked with a pencil around the entire diameter to cut a straight line... cut the body to suit my required length, cut the inner core just shy of the outter body, cleaned up all the 'matting'... reinserted the inner core, and welded the body to fwd section... welded the 'aft' section on, cleaned, buffed n painted... mounted Rev. 'B' and VAROOOOOOM...... :bowdown: :clap: :yes: :thumbup: