• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Ride-On and FOBO

Is Ride-On tire sealant compatible with using a tire pressure sensing FOBO system? Or will gum up the FOBO?

Q: Is Ride-On Tire Pressure Monitor (TPMS) Friendly?

A: Yes. Ride-On (TPS) is tire pressure monitor sensor (TPMS) friendly in TPMS sensors that are hermetically sealed. Most sensors on motorcycle, autos and commercial fleet applications are hermetically sealed. We do not recommend the use of Ride-On in 2009, 2010, and 2012 Honda Gold Wings as their TPMS sensors are not potted (hermetically sealed). Also certain KTM 1190 and 1290 Adventures may have unsealed (non-potted) electronics and therefore should avoid the use of our sealants.

If your sensors are not sealed, then we do not recommend the use of Ride-On with them. Although using Ride-On with these types of sensors does not always create issues, we as the manufacturer of Ride-On do not recommend using our product in applications with TPMS systems without potted electronics. Even moisture contained in the compressed air can enter the electronics and over time create issues not related to any tire sealant. We recommend that you check with your dealer or manufacturer to determine whether your TPMS sensor has potted electronics and batteries.

You can read more here. http://www.ride-on.com/tpms
 
Back
Top