-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Removing seat on 2009 RS
- Thread starter dpetrick
- Start date
PistonBlown
Active member
Looking at your avatar picture you've got a topbox and I'm guessing that's mounted to a rack? Hard to work out if it is or not as its such a small picture.
If its not and it is the plastic tailpiece there's there's the single bolt underneath which is sounds like you've found but also a tab down each side that clicks in under the light. Trick is to ease one side up and then the other, pulling from the side and back. There's probably an official way to do it but I've not worked it out
However if you have got the rack then its a bit more involved. Its been a while since I've need to but from memory you have to Remove the single bolt underneath same one as for the rack. Remove two bolts from underneath on either side to release the underside part of the rack. Then remove the rack lid by pulling a red pull lever under the seat on the right hand side and lifting it (two pulls of the lever normally required as it has a safety stop) and then the 4 big bolts that were hidden by the lid, then finally you can pull the rack back and off.
I'll try and find some photos I can put some arrows on.
If its not and it is the plastic tailpiece there's there's the single bolt underneath which is sounds like you've found but also a tab down each side that clicks in under the light. Trick is to ease one side up and then the other, pulling from the side and back. There's probably an official way to do it but I've not worked it out
However if you have got the rack then its a bit more involved. Its been a while since I've need to but from memory you have to Remove the single bolt underneath same one as for the rack. Remove two bolts from underneath on either side to release the underside part of the rack. Then remove the rack lid by pulling a red pull lever under the seat on the right hand side and lifting it (two pulls of the lever normally required as it has a safety stop) and then the 4 big bolts that were hidden by the lid, then finally you can pull the rack back and off.
I'll try and find some photos I can put some arrows on.
Similar threads
