• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Rear brake

MikeinGA

New member
Why does the rear brake wear more than the front? The rear brake pads are worn more on the left pad(the one closest to tire) then the right. The right pad is .049 inchs and the left is .035 inchs. The book has the pads at 1 mm (about .040) thick before changing. I got new pads from BajaRon, I hope they last longer than 13,000 miles.

Mike
 
The rear wearing more has puzzled me, too. It could be that there are two fronts but only one rear. The fronts take more of the braking load, but probably not twice as much. The total frontal pad area is certainly greater. As to the left and right pads in the same caliper wearing unevenly, that is probably a result of the caliper not floating as freely as it should. When you replace the pads, be sure to remove the sleeves, clean them and the o-rings, and lubricate the o-rings, sleeves and pins with disc brake lube. The piston side pad does usually wear more, but yours may be a little farther apart than would be optimal. It's a judgement call, there are no specs. I got 14K out of my rear pads, so yours seems to be typical.
 
The rear wearing more has puzzled me, too. It could be that there are two fronts but only one rear. The fronts take more of the braking load, but probably not twice as much. The total frontal pad area is certainly greater. As to the left and right pads in the same caliper wearing unevenly, that is probably a result of the caliper not floating as freely as it should. When you replace the pads, be sure to remove the sleeves, clean them and the o-rings, and lubricate the o-rings, sleeves and pins with disc brake lube. The piston side pad does usually wear more, but yours may be a little farther apart than would be optimal. It's a judgement call, there are no specs. I got 14K out of my rear pads, so yours seems to be typical.


I was told that due to the the size and weight of the rear wheel and a single piston caliper and that the rotor are about the same size as the front brakes, the rear brakes need more pressure to work. It's an easy job to change the rear brake pads and BajaRon pads are only $35.95 and no tax or shipping.


Mike
 
Back
Top