• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

REALLY PISSED OFF

BLACK SPYDERRT

New member
2011 SPYDER RTS WITH 6800 MILES
TOOK A RIDE TONIGHT.
CRUSING AT ABOUT 85 IN 5TH GEAR WITH THE CRUISE ON
.... E... CAME ON IN THE DIGITAL AREA WHERE THE GEAR IS NORMALLY DISPLAYED.

N AND R WHERE ALSO STARTED FLASHING IN THE ANALOG SPEDOMETER.
ENGINE KEPT RUNNING FINE ON THE WAY HOME PUSHED 70+ A COUPLE OF TIMES ON THE WAY HOME JUST BECAUSE IM STUPID.
KEPT AN EYE ON THE ENGINE TEMP RAN A LITTLE HOTTER ONE MARK PAST HALFWAY USUALLY STAYS CLOSE TO HALFWAY AND I FELT EXTRA HEAT ON MY RIGHT LEG.
LET IT COOL OFF IN THE DRIVEWAY .
STARTED BACK UP AND ALL SEEMS OK

JUST CHECKED THE OIL VERY THIN LIKE WATER
MUST BE ANTIFREEZE
NOW WHAT !!
AN ENGINE REBUILD AT 6800 MILES WITHOUT WARRANTY
I HAVE MY BIKE SERVICED AT A LOCAL DEALER, OIL WAS CHANGED LAST MONTH, ALL FLUIDS WERE REPLACED BY DEALER LAST YEAR ALSO.
I HAD ALSO CHECKED THE ANTIFREEZE LEVEL 2 WEEKS AGO AND THAT WAS FINE.
THEY SHOULD BUILD A BIKE THATS LAST MORE THAN 6800 MILES AND IF THE BIKE CAN'T TAKE CRUISING AT 85 THEY SHOULD TELL YOU!

DOES ANYONE HAVE A CAN AM PHONE NUMBER?
I WOULD LIKE TO REGISTER A COMPLAINT WITH THE MANUFACTURER.

THANKS!!


PISSED


CRAIG
 
A lot of good people answered your post yesterday and correctly diagnosed your problem as a problem with the Gear Position Sensor. There is likely nothing wrong with the temp or antifreeze in the oil. If you don't believe us take it to your dealer.
 
A lot of good people answered your post yesterday and correctly diagnosed your problem as a problem with the Gear Position Sensor. There is likely nothing wrong with the temp or antifreeze in the oil. If you don't believe us take it to your dealer.
I SMELL ANTIFREEZE AND THE OIL IS AMOST CLEAR AN DRIPS LIKE WATER OFF THE DIP STICK
 
I SMELL ANTIFREEZE AND THE OIL IS AMOST CLEAR AN DRIPS LIKE WATER OFF THE DIP STICK

If there is antifreeze in the oil. The oil should look whitish?
What is the level of the coolant in the reservoir?
Coolant leaking into the oil is so rare I don't remember anyone else posting with that problem. So sorry I am skeptical.
 
You said you checked coolant two weeks ago and it was fine. Now you think you have a coolant leak, yet you never mention checking it again.

If there is coolant in your oil it will look milky white. If you check the oil with the bike still hot, it will appear pretty thin. That's called viscosity, and the oil gets thinner when hot.

The only real issue you may have is a failing gear position sensor. The rest of the problems you think you have, you don't.
 
Are you missing antifreeze? Quit guessing, take an oil sample and have it analysed. Oil and antifreeze will not mix. You may bash BRP and Rotax power plants if you wish...but, they produce world class motors of the highest quality.:thumbup: Don't take my word, do your own research.
 
Water in the oil....??

about the only way for that to happen is a blown head gasket for which you would have gotten more lights than an E....Your coolant level should be way down and your engine overheating big time. Now if you want to get brp involved take it to the dealer so they can confirm and you can have them get you in touch or at least help you with diagnostics...
 
about the only way for that to happen is a blown head gasket for which you would have gotten more lights than an E....Your coolant level should be way down and your engine overheating big time. Now if you want to get brp involved take it to the dealer so they can confirm and you can have them get you in touch or at least help you with diagnostics...
ALSO GOT N AND R FLASHING AT THE SAME TIME AS E AS I MENTIONED IN THE ORIGINAL POST
I WILL CHECK THE ANTIFREEZE LEVEL IN THE MORNING
BUT I KNOW WHAT ANTIFREEZE SMELLS LIKE AND I CHECK THE OIL REGULARLY WHEN THE BIKE IS HOT AND IT HAD BUBBLES ON THE DIPSTICK ALMOST CLEAR AND WATERY
 
From your post above: "THEY SHOULD BUILD A BIKE THATS LAST MORE THAN 6800 MILES AND IF THE BIKE CAN'T TAKE CRUISING AT 85 THEY SHOULD TELL YOU!

DOES ANYONE HAVE A CAN AM PHONE NUMBER?
I WOULD LIKE TO REGISTER A COMPLAINT WITH THE MANUFACTURER."

IMO: A bit early to go on a rant about the product or the company. Have seen a lot of people post that they drive that speed all day with no problems.

You have received good advice in both of your threads. The hard part is the working through the suggestions. Don't cut ties with the dealer at this point in time over this. You may need them to go to bat for you with BRP. Another word of advice, don't talk about lawyering up. You will be treated "special" after that.

Hope this does work out all right and that the fix is not to drastic. Please do keep us posted as you work through this.
 
From your post above: "THEY SHOULD BUILD A BIKE THATS LAST MORE THAN 6800 MILES AND IF THE BIKE CAN'T TAKE CRUISING AT 85 THEY SHOULD TELL YOU!

DOES ANYONE HAVE A CAN AM PHONE NUMBER?
I WOULD LIKE TO REGISTER A COMPLAINT WITH THE MANUFACTURER."

IMO: A bit early to go on a rant about the product or the company. Have seen a lot of people post that they drive that speed all day with no problems.

You have received good advice in both of your threads. The hard part is the working through the suggestions. Don't cut ties with the dealer at this point in time over this. You may need them to go to bat for you with BRP. Another word of advice, don't talk about lawyering up. You will be treated "special" after that.

Hope this does work out all right and that the fix is not to drastic. Please do keep us posted as you work through this.

THANKS FOR YOUR POST. MY DEALER IS ALMOST 15 MILES AWAY. HOPE YOUR ALL RIGHT AND I DON'T GET STUCK
 
Last edited:
THANKS FOR YOUR POST. MY DEALER IS ALMOST 15 MILES AWAY. HOPE YOUR ALL RIGHT AND I DON'T GET STUCK


FYI in Internet land ALL CAPS mean you are shouting, I understand that you are pissed, but take a Vicodin and get some control, **** happens, you are ether covered by a warranty, or you are not, and you will write a check. Since most of use are over 60, and if this is the first crap that has happened to you so far in life, consider yourself lucky. Most of us have had a lot of crap in their lives and have learned to deal with what you can control and get out of the way of what you can't.
 
MY DEALER IS ALMOST 15 MILES AWAY. HOPE YOUR ALL RIGHT AND I DON'T GET STUCK
You're fortunate! Compared to how far most Spyder owners have to travel to get to a dealer yours is same as across the street! Take a sample of oil out of the tank and let it set in a clear jar for a day or two. If there's antifreeze in it it'll settle to the bottom and you can clearly see the difference between the oil and water.
 
ALSO GOT N AND R FLASHING AT THE SAME TIME AS E AS I MENTIONED IN THE ORIGINAL POST
I WILL CHECK THE ANTIFREEZE LEVEL IN THE MORNING
BUT I KNOW WHAT ANTIFREEZE SMELLS LIKE AND I CHECK THE OIL REGULARLY WHEN THE BIKE IS HOT AND IT HAD BUBBLES ON THE DIPSTICK ALMOST CLEAR AND WATERY

Does you radiator have oil in it? If you have a blown head gasket you would likely have oil in the antifreeze and antifreeze in the oil. Bubbles on the dipstick is not unusual and you should let the bike idle for 30 seconds or so to let the bubbles subside before you check it.
 
I had the same indicators on the display it was caused by my bike wash I got water in the conectors I let it dry the problem when away.
 
Maybe you need to slow down to a safe speed limit.
:shocked: Sorry... I don't see this as helpful...

The entire "EVERYTHING IN CAPITALS"... can seem a bit "loud" for some of us...
Let's work the problem, and see what is found.
Take it one step at a time, and let us know what you find; good luck! :thumbup:
 
Gear Position Sensor

Had the same problem 2 weeks ago,. Took the bike to the dealer and they discovered an oil leak from the seal in the water pump. Oil was therefore a little low causing a problem with the gear position indicator. They replaced the leaking seal and no problem since then. They even cleaned all the bugs off the bike. This seal was replaced just over a year ago when the bike was still under warranty, but BRP said the seals they used were poor and they are now using a better quality seal. They didn't even charge me the $50.00 deductible under the B.E.S.T. warranty. Thanks BRP and Walt's Sales and Service in Derby, VT.
 
Had the same problem 2 weeks ago,. Took the bike to the dealer and they discovered an oil leak from the seal in the water pump. Oil was therefore a little low causing a problem with the gear position indicator. They replaced the leaking seal and no problem since then. They even cleaned all the bugs off the bike. This seal was replaced just over a year ago when the bike was still under warranty, but BRP said the seals they used were poor and they are now using a better quality seal. They didn't even charge me the $50.00 deductible under the B.E.S.T. warranty. Thanks BRP and Walt's Sales and Service in Derby, VT.


thanks for your post
checked the antifreeze level this morning
had filled it to the max line 2 weeks ago and it is empty now
checked the oil again smells like antifreeze
poured some out of the brp oil i have no smell
i should probably have them pick up the bike
 
Back
Top