-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Re-installing rear trunk lock
- Thread starter Alien Leg
- Start date
JayBros
Well-known member
My Green service manual does not go into any detail. But once you remove the rear panel, PN depends on your color, there are 4 Torx M6X10 screws that hold the Main Control, PN 708302620 in place. Left to my own devices I would take photos and make notes of each step in removing the MC and the lock cylinder has to be held in place some kind of clip ring or some such device. You should be prepared for a single ball holds the cylinder in the correct orientation. I've had my real panel off only once years ago to install a plug and play brake light modulator and ignored the MC because its removal was not part of the job.
Similar threads
