-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
re Installation instructions for Lamonster belt tensioner?
- Thread starter bmwlarry
- Start date
I don't think there's a video on how to install on a 2010-2019 RT but it's pretty easy. You'll need to remove the left side big/long piece of tupperware then it bolts on to the area where the round tube meets the non-round tube. It'll make sense once you see it. Search for Lamonsters video on installing one on a 2020 RT. Tupperware removal is different but the actual installation is the same.
AeroPilot
Member
I installed one on my 15 RT this spring.. Its pretty easy to see where it goes after you remove the long plastic left side panel. Just one top bolt and one bolt of the front side of the frame piece; and center the roller on the belt before you tighten them down. If you email Lamont, I bet he can help if needed..
EdMat
Well-known member
Try this link, they are on his website.
http://www.lamonstergarage.com/can-am-spyder-f3-rt-belt-tensioner-idler-pulley-lamonster/
http://www.lamonstergarage.com/can-am-spyder-f3-rt-belt-tensioner-idler-pulley-lamonster/
