Radio Preset Help

[shroth]

I know I saw it here before.................How do I clear my radio presets & start over? Tell me how to overwrite one & I'll be happy.

 

[DRTSB]

Radio presets

They overwrite as you program, here's the steps
​

1. 
   [*=left]Press the Mode button until the Audio icon appears.
   [*=left]Use the right or left command buttons to find the radio station you want. A long press will do a seek to the next available station. Continue doing a seek until the station you want appears.
   [*=left]Here is the missing step. Press the Set button longer than one second to enter the Tune or Setup screen. The word Record should appear under the numbers of the current radio station. The shop manual states that you can tune the station in increments of .2 by short pressing the left or right command buttons now.
   [*=left]Short press the Up button until the Preset number you want appears in the box to the left side of the screen. I noticed that this step can be touchy at times trying to get the number to stay in the box!
   
   [*=left]Immediately press and hold the down button. Once the preset takes, the screen will exit the Tune or Setup screen and returns to the initial Audio screen.
   [*=left]Repeat steps 2 through 5 for the next preset. Note that doing a short press of the left or right command buttons will cycle through the already set presets. A long press will start the seek.

Dave ​

 

[shroth]

Thank you so much!! Miss my days in Ottawa at the Rideau Canoe Club & going downtown for Beavertail!!!!!

Happy Tulip Festival...................

Steve

They overwrite as you program, here's the steps
​

1. 
   [*=left]Press the Mode button until the Audio icon appears.
   [*=left]Use the right or left command buttons to find the radio station you want. A long press will do a seek to the next available station. Continue doing a seek until the station you want appears.
   [*=left]Here is the missing step. Press the Set button longer than one second to enter the Tune or Setup screen. The word Record should appear under the numbers of the current radio station. The shop manual states that you can tune the station in increments of .2 by short pressing the left or right command buttons now.
   [*=left]Short press the Up button until the Preset number you want appears in the box to the left side of the screen. I noticed that this step can be touchy at times trying to get the number to stay in the box!
   
   [*=left]Immediately press and hold the down button. Once the preset takes, the screen will exit the Tune or Setup screen and returns to the initial Audio screen.
   [*=left]Repeat steps 2 through 5 for the next preset. Note that doing a short press of the left or right command buttons will cycle through the already set presets. A long press will start the seek.

Dave ​