Question on throttlemeister

[aubierules]

I am thinking of putting the throttlemeister on my spyder. I have had problems of my hand going numb....I replaced the grips with soft foam and they work real good...my question is this...has anyone put the heavy throttlemeister on their spyder(they make a heavy and a standard)....if so did it make the stearing heavier(harder) i cant decide on the heavy versus the standard....i think the heavy might help more with vibration, but will it steer alot heavier?

confused?!?! me too

thanks

 

[Recluze]

I have had a Throttlemeister on mine for some 12,000 miles and it one of the best things I have done to the bike. I do not know if it is heavy or light though. I have never had any vibration with or without it so I am not sure that I would notice a difference in any case.

I think I like the Throttlemeister better than a cruise control. With the Throttlemeister you have to make corrections as you gain or lose altitude so that tends to keep me awake.

Good luck with your decision.

 

[NancysToy]

We have standard Throttlemeisters on both the Spyder and my BMW. BJT and Dltang have the heavy on their Spyders. Neither changes how the Spyder steers. They both serve just as different sized bar-end weights, which can reduce handlebar vibration. There are also many other causes of hand numbness besides vibration, however, including carpel tunnel, wrist position, shoulder position, neck position, and your posture. If you want a throttle friction device to use as a sort of cruise control to relax your hand periodically, the Throttlemeister does the job well. It also doubles as a bar-end weight. If you just need the weight, they are available separately, from many sources, including BRP, I think. Handlebar risers are an alternative that have aloso helped some riders with this problem. Good luck in finding a solution that works for you.
-Scotty

 

[bjt]

:agree:

 

[crazycanuck]

We have standard Throttlemeisters on both the Spyder and my BMW. BJT and Dltang have the heavy on their Spyders. Neither changes how the Spyder steers. They both serve just as different sized bar-end weights, which can reduce handlebar vibration. There are also many other causes of hand numbness besides vibration, however, including carpel tunnel, wrist position, shoulder position, neck position, and your posture. If you want a throttle friction device to use as a sort of cruise control to relax your hand periodically, the Throttlemeister does the job well. It also doubles as a bar-end weight. If you just need the weight, they are available separately, from many sources, including BRP, I think. Handlebar risers are an alternative that have aloso helped some riders with this problem. Good luck in finding a solution that works for you.
-Scotty

for me I think its the posture position. Do great on my bike but when I demo'd the Spyder, whoa....I was hurting after the first hour and also due to the fact I hated the ride, was hanging on for dear life because I didn't like the way it turned and my back was in a slouch position. Once I am riding the Spyder more consistently I will find my comfortable position.ray:

 

[aubierules]

We have standard Throttlemeisters on both the Spyder and my BMW. BJT and Dltang have the heavy on their Spyders. Neither changes how the Spyder steers. They both serve just as different sized bar-end weights, which can reduce handlebar vibration. There are also many other causes of hand numbness besides vibration, however, including carpel tunnel, wrist position, shoulder position, neck position, and your posture. If you want a throttle friction device to use as a sort of cruise control to relax your hand periodically, the Throttlemeister does the job well. It also doubles as a bar-end weight. If you just need the weight, they are available separately, from many sources, including BRP, I think. Handlebar risers are an alternative that have aloso helped some riders with this problem. Good luck in finding a solution that works for you.
-Scotty

cool thanks...maybe dlang and bjt can give their 2 cents on the heavy..im leaning towards the heavy, especially since it wont make the steering harder....I had heavy bar ends on my ninja and it did make a difference, most likely cause of 2 wheels and not three..ie no push pull

thanks guys:thumbup:

 

[SpyderGirl]

We love our throttlemeister. I too had the problem of my hand going numb when I was riding. I found the biggest thing that fixed that wasn't the throttlemeister, but the 1" handlebar riser... HUGE difference. I don't have that problem anymore. But I still like having the throttlemeister for long trips.

 

[bjt]

cool thanks...maybe dlang and bjt can give their 2 cents on the heavy..im leaning towards the heavy, especially since it wont make the steering harder....I had heavy bar ends on my ninja and it did make a difference, most likely cause of 2 wheels and not three..ie no push pull

thanks guys:thumbup:

One time, while on a long ride to Valcourt, Quebec, we hit a patch of road where the surface seemed to be giving more vibration to the handlebars than normal and my throttle hand got very sore, very fast. After that, I decided that I needed some type of throttle lock or cruise control to be able to be able to give my right hand a break. I got the heavy Throttlemeister because thats what my wife had and thats what they were recommending for the Spyder. Since having it, I haven't hit a similar patch of road surface that caused that vibration. Normally I don't think that the Spyder's handlebars transmit a lot of vibration so I can't really say that those heavy bar ends took away the irritating vibration.

I can say for sure that I noticed absolutely no difference in steering effort with the Throttlemesiter installed and it works very well for giving my throttle hand a short break. I may need to adjust it a little better but I can only ride for about a minute, sometimes less, without my hand on the throttle before I start to lose speed.

 

[Roaddog2]

I wonder if we can get them to give us a group discount:ani29:

 

[czdaryle]

if you get a group discount I'm in

 

[bone crusher]

if you get a group discount I'm in

You should get one regardless...many of us from here have already purchased...I can't wait to get mine on the bike...right now it's sitting in the small box it comes in...can't wait til spring...

Everyone who has one loves it! I'm sure I'll love mine too!

 

[aubierules]

One time, while on a long ride to Valcourt, Quebec, we hit a patch of road where the surface seemed to be giving more vibration to the handlebars than normal and my throttle hand got very sore, very fast. After that, I decided that I needed some type of throttle lock or cruise control to be able to be able to give my right hand a break. I got the heavy Throttlemeister because thats what my wife had and thats what they were recommending for the Spyder. Since having it, I haven't hit a similar patch of road surface that caused that vibration. Normally I don't think that the Spyder's handlebars transmit a lot of vibration so I can't really say that those heavy bar ends took away the irritating vibration.

I can say for sure that I noticed absolutely no difference in steering effort with the Throttlemesiter installed and it works very well for giving my throttle hand a short break. I may need to adjust it a little better but I can only ride for about a minute, sometimes less, without my hand on the throttle before I start to lose speed.

cool ty

 

[pitmon]

just ordered mine, can't wait to get it installed and try it out. I will wait until after I get the NMN risers put on tho, hope to get those at Daytona Saturday:yes:

 

[bdspyder]

One of the first mods I did and well worth it. The style they offer for the spyder really looks good too. You cant go wrong:2thumbs:

 

[bone crusher]

One of the first mods I did and well worth it. The style they offer for the spyder really looks good too. You cant go wrong:2thumbs:

I've had one on my desk now for over a month...can't wait for a nice day to get this thing on...argh!

 

[aubierules]

well

i ordered the heavy set yesterday:clap:

 

[aubierules]

well i got it

a piece of cake to install, and works great:thumbup:

 

[bjt]

:congrats:

 

[aubierules]

:congrats:

:thumbup:

 

[dltang]

cool thanks...maybe dlang and bjt can give their 2 cents on the heavy..im leaning towards the heavy, especially since it wont make the steering harder....I had heavy bar ends on my ninja and it did make a difference, most likely cause of 2 wheels and not three..ie no push pull

thanks guys:thumbup:

Honestly, I got the heavy because I liked the looks better. Just a bit longer and easier to control and turn while driving, IMO. It takes a little getting used to, to turn on the throttlemeister as I pick up speed getting on the expressway, and learning to roll it on and off. Once you get the hang of it though, it is very easy and I love having it. We have taken numerous long trips and it has made all the difference in the world.
Deb