• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Question on fender tip lights 08 GS

Warlock

New member
Was wanting to put 194 led bulbs in my fender tip running lights. Do they have to have a resistor in them or can I run any 194 led bulbs in them. Was wondering if it would fool with the computer. Seems like I read a post about this, but cannot find it.
thanks, David
 
I installed a set of cheapies off of ebay, one worked, one flickered. threw them in the trash and ordered a set off either spyderpops or lamont, don't remember who, and they work fine.
 
NANNY ISSUES

Was wanting to put 194 led bulbs in my fender tip running lights. Do they have to have a resistor in them or can I run any 194 led bulbs in them. Was wondering if it would fool with the computer. Seems like I read a post about this, but cannot find it.
thanks, David
I don't think you will have an issue .....but keep your old Bulbs just in case :lecturef_smilie: :roflblack: :roflblack: ..............Mike :thumbup:
 
I don't think you will have an issue .....but keep your old Bulbs just in case :lecturef_smilie: :roflblack: :roflblack: ..............Mike :thumbup:

Will give it a try. Didn't know how nanny would like the bulbs not pulling very many watts. Will try some and report back later.
David
 
Depends...

I got a set from the autoparts store plugged them in and they work great. I also added red led turnsignals under the regular turnsignals and tapped into the brake lights with no issues.If you have an incandecent bulb in the system they work fine. :thumbup:
 
Back
Top