Question - 2021 BRP hitch harness - access for BRP Factory harness plug in

[RTLRider]

I have the BRP hitch installed on my Sea To Sky and looking to install the factory harness. Appears on newer models you have to remove rear panel where taillight is as well as rear wheel fender - to access where this harness plugs in . I am ok with doing that myself but these BRP online instructions absolutely suck - bunch of black and white vague pictures . Instructions don’t even tell you how to remove to access the area for harness - it just shows a picture of area with back already removed. Can anyone tell me how I get access to remove that area for harness behind taillight. I can’t find a video covering that removal. Do I loosen or remove fasteners holding both saddlebags first ? Slide them aside to be able to get to fasteners for taillight area ?

 

[jtoro1]

I purchased the plug and play from Canada $124 better than the show chrome harness look it up on ebay from custom wire

 

[fatboy]

go to sling mods look at after burner lights watch video ps the power wire is all wrapped up in tape

 

[RTLRider]

I purchased the plug and play from Canada $95 better than the show chrome harness look it up on ebay

I already purchased the factory kit so going to install that.
Scott

 

[RTLRider]

Good idea ��

 

[K80Shooter]

While the video from Sling Mods is great, you still have to remove 2 of the screw/push pins at the top of the mudflap (one at each side) at the bottom of the panel to completely remove that panel.

While you have it off if you're planning on adding some extra lights, now is the time to do so.

I highly recommend these. https://store.valueaccessories.net/SpyderRT2020RearLEDRunBrakeTurn.aspx