Put the Bajaron on today

[SailnDive]

It took about 4 hours by the time I got everything together, read the instruction and figured it out. The fork lift made it much easier. I could do it much faster now. I had two bolts left over...I hate that...I have no idea where they go. I'm a pretty good wrencher but I missed something on this job. I took the RTs for a short ride and I can tell the difference. We are going for an extended ride thru the mountains tomorrow and I will have a better idea then. Very well made kit and instructions. There is not a big difference between the stock bar dia and this but time will tell.

 

[Highwayman2013]

A picture of the bolts would be helpful.

 

[Chupaca]

Well done..!!

congrats on your DIY job. :2thumbs: might want to check those extras before your trip...take them along in case you find out on the road...:roflblack:

 

[arvol]

put the bajaron swaybaron.

How did you use the fork lift I was thinking of using this method but was not sure it would work.

 

[SailnDive]

How did you use the fork lift I was thinking of using this method but was not sure it would work.

I adjusted the forks to 24" wide so they fit just behind the front fenders and in front of the spring that holds the muffler. I lifted about 4' which made it really easy to get at all of the bolts and rubber fasteners. My forks are on my backhoe front end loader arms and this made for a very stable lift.

I'm going to try to locate where my 2 extra bolts go this morning and then for a long ride over very twisty mountain roads. More to repot this evening. The bolts have a 10mm head and are about 1.25" long. Guessing about 2.5 mm dia.

Blue skies in WV this AM, should be a great day to ride.

 

[Bob Denman]

Good Luck with your search for the "Missing" bolt holes, and we await your "Report From The Saddle"! :thumbup:

 

[Highwayman2013]

Could be lower Frunk bolts.

 

[kbwitt]

Bajaron comes with 2 longer bolts thats why you have 2 extras N/T

N/T means no message. But this forum ,
Makes you put a message

 

[SailnDive]

Found the holes for the bolts. All is well. Took a 110 mile ride this AM