-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Pulling up fault codes on GS
- Thread starter Crisis
- Start date
NancysToy
Motorbike Professor
With ignition switch on (or engine running) press MODE button repeatedly until "engine hours" (total hours) shows on display.
Press and hold MODE button while pushing the "flash high beams" button five times within 2 seconds.
If there are no active faults "No Active Fault Code" will be displayed.
If there is an active fault, an alphanumeric code will be displayed. This can be looked up in the shop manual (available on CD) or you can ask on SpyderLovers and someone will look it up for you.
If there is more than one active code, you may press MODE to cycle through them.
I believe this procedure is in your manual.
Press and hold MODE button while pushing the "flash high beams" button five times within 2 seconds.
If there are no active faults "No Active Fault Code" will be displayed.
If there is an active fault, an alphanumeric code will be displayed. This can be looked up in the shop manual (available on CD) or you can ask on SpyderLovers and someone will look it up for you.
If there is more than one active code, you may press MODE to cycle through them.
I believe this procedure is in your manual.
Similar threads
