passenger floorboard adjustment

[MSGTDOC]

Ok I need help. What needs to be done to adjust the passenger floorboard son a 2012 RTS. I haven't had a chance to really check this but I figured I'd ask the pros on this board first before I get stupid.:yikes:

 

[warp10]

Loosen the bolt under the floor board and slide the floor board up or down. You don't have to take it all the way out.

 

[reverendg]

Loosen the bolt under the floor board and slide the floor board up or down. You don't have to take it all the way out.

Mine had 2 nuts on each board, a jam nut locks it tight that way.

 

[Lin]

I use an allen wrench to loosen a single cap screw on my 2011, then slide the foot board up or down and retighten.

 

[Bob Denman]

(You might need to flip the board up; for easier access to the hardware...)

 

[NancysToy]

I believe the procedure is in your owners manual.

 

[Bob Ledford]

Allen wrench is a no no

The floorboard bolt is TORX and cost it costs almost $9 USD.but simple to repair or replace you got together dirty but that's half the fun