-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Pairing Sena to Scala
- Thread starter pwm
- Start date
billybovine
Active member
The instructions are on page 33 of the users guide.
http://senabluetooth.com/wp-content/uploads/2014/02/UsersGuide_Sena_SMH10_v5.0.pdf
pwm
New member
Thanks that's what I needed.
billybovine
Active member
pwm
New member
Will do although it will be a couple of weeks before Joe and I get to ride together again.
spyderdmb1621
New member
Yes and works great not a fan of scalaridder
Found this on another board, haven't tried it yet...
How to pair a Sena SMH10 with a Scala Rider G9 - new Universal Intercom function
As many of you with either headset may already know, as of firmware version 5.0 for the Sena SMH10, you can intercom with Scala riders and also one other brand, I forget which, but it seems most people have Scala/Sena.
It's very poorly documented and took myself and a friend a good while to nut out, but we got to the bottom of it last night, just keep in mind it may be a different process on the Scala rider if you have a model other than the G9, but my feeling is you would use the same function.
---------------------------------------------------------------------------------------------------------------
Turn on both units so they are in standby mode (should be a slow flashing blue for both.
Hold the jog dial button down on the Sena for ~8 seconds until it flashes blue really fast.
Hold the off switch on the Scala Rider G9 (middle top) for about 6 seconds, it turns off, but when you keep holding it it goes into the correct pairing mode (the same mode as pairing with a phone I believe) flashing purple and another colour, I think red...
Then on the Sena click the jog dial button once, wait a good 3-5 seconds, and they are paired!
How to pair a Sena SMH10 with a Scala Rider G9 - new Universal Intercom function
As many of you with either headset may already know, as of firmware version 5.0 for the Sena SMH10, you can intercom with Scala riders and also one other brand, I forget which, but it seems most people have Scala/Sena.
It's very poorly documented and took myself and a friend a good while to nut out, but we got to the bottom of it last night, just keep in mind it may be a different process on the Scala rider if you have a model other than the G9, but my feeling is you would use the same function.
---------------------------------------------------------------------------------------------------------------
Turn on both units so they are in standby mode (should be a slow flashing blue for both.
Hold the jog dial button down on the Sena for ~8 seconds until it flashes blue really fast.
Hold the off switch on the Scala Rider G9 (middle top) for about 6 seconds, it turns off, but when you keep holding it it goes into the correct pairing mode (the same mode as pairing with a phone I believe) flashing purple and another colour, I think red...
Then on the Sena click the jog dial button once, wait a good 3-5 seconds, and they are paired!
pwm
New member
Thank you. Now head to Montgomery Inn and treat yourself.
pwm
New member
Well we got to ride yesterday and using the above instructions,me paired our intercoms. It was fairly easy and worked well but you have to leave the mike open a talk times. If I placed mine into standby mode, the Scala would not connect to me until I pressed the jog wheel. Not sure if we did something wrong or not.
Similar threads
