• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

now that I got it what do I do with it??

Andy Cserny

New member
I bought the electric frunk opener and a pushbutton OFF momentary ON switch with a waterproof rubber boot, now where do I put the opener mechanism? and how is the best way to hook it up? I am sure someone has already gone this route and I sure would be grateful to anyone who could save me from reinventing the wheel. I know where and how I want to mount the switch.
thanks
Andy
 
frunk opener

I am assuming you have the standard BRP kit.

The opener mechanism bolts directly under the frunk latch and is connected to the latch with a spring
Basically it is a servo the pulls open when the power is applied.

I do not know if the 2014 models are pre wired for this.
My bet is they are so wiring should be a matter of finding the socket under the lid and plugging it in.

I have an instruction sheet that I can scan and post if that would be helpful.

Hi Roger,
No I dont have the oem item, I bought one from eBay that is supposed to look like it and now am wondering how to mount it. since I am new to Spyders and dont know what the previous RT's looked like that had the trunk opener mechanism I am somewhat at a loss. I dont even know wheere the switch was on the models that had the trunk opener. Finding a place for the switch and running the wires is no problem, but I havent a clue how the opener was mounted since I have never seen one on a Spyder. Please do send me the instruction sheet and any photos you may have of the opening mechanism mouted in place on a Spyder.
Thanks,
Andy
 
When we bought our 14 RT I was slightly

disappointed that unlike our 13', it did not come with the electric switch. We had the dealer install the OEM switch etc. and the price was reasonable. I know you don't have to have it to open the frunk, but it sure is nice. Did you get a price from the dealer on the OEM parts? Best of luck.
 
Back
Top