not happy with corbin

[mastertek2000]

well i spent a lot of money on a Corbin heated seat and was not happy with quality
when i first took the seat out of the box one of the rubber bumps on the bottom of the rear seat fell off
then when i got the in stall done the point of the web does not even meat up with the center line the can-am

 

[dannymax]

I can see what you're saying about the web point not lining up but other than that it's a great looking seat IMO.
Looks really nice on your :ani29:

 

[ARtraveler]

You might be able to adjust the seat a little bit right or left to center the web. IMO its not off that much.

 

[aka1004]

I think it's just that expectation is not the same when you spend corbin kinda dollars.
I would want them nearly perfect if not perfect.
I don't expect the same if I bought a seat from Walmart.
I know I know Walmart don't sell bike seat but they might

 

[SpydermanCT]

well i spent a lot of money on a Corbin heated seat and was not happy with quality
when i first took the seat out of the box one of the rubber bumps on the bottom of the rear seat fell off
then when i got the in stall done the point of the web does not even meat up with the center line the can-am

I would have to agree, if I spent that kind of money on a seat I would expect the lines to be right on. I hope when you contact Corbin the answer you get is "No problem, we will take care of that for you Sir".

 

[Rayelljay]

Mine was similar but after a couple of hundred miles of riding it was fine.

 

[mastertek2000]

You might be able to adjust the seat a little bit right or left to center the web. IMO its not off that much.

Becuase of the locking pin I can't move it left anymore

I think it's just that expectation is not the same when you spend corbin kinda dollars.
I would want them nearly perfect if not perfect.
I don't expect the same if I bought a seat from Walmart.
I know I know Walmart don't sell bike seat but they might

My feeling Also i have no problem spending the money but expect to get what I pay for

I would have to agree, if I spent that kind of money on a seat I would expect the lines to be right on. I hope when you contact Corbin the answer you get is "No problem, we will take care of that for you Sir".

I would think so I don't think I am bein picky if I was doing this for some else I would saying the same to him I like perfection will keep you guys update as I go

 

[bone crusher]

well i spent a lot of money on a Corbin heated seat and was not happy with quality
when i first took the seat out of the box one of the rubber bumps on the bottom of the rear seat fell off
then when i got the in stall done the point of the web does not even meat up with the center line the can-am

Check around for old threads on Corbin's quality...there have been many before you with complaints...I seem to remember many on paint quality, but that was a year or two ago...it seems like they are very hit or miss...

 

[Arthur---Mexico]

corbin seat

I'll sell you mine that's in very good condition that goes on a GS 2008 SE5 Spyder for $250.00. [email protected].

I can see what you're saying about the web point not lining up but other than that it's a great looking seat IMO.
Looks really nice on your :ani29:[/QUOTE]

 

[wa3wheels]

Corbin

Keep in mind that Corbins are hand made. You will not notice web offset after 200 miles. Looks great!

 

[CyncySpyder]

Frustrating & disapointing, Teddy & I hope they make this right for you

Like previously posted, when spending this kinda $$ on a custom product, you expect the quality & workmanship to be better than what you have recieved:lecturef_smilie: I, along with many other SpyderLovers members will be following along to see how they handle this & are hoping for the BEST for youray: Keep us posted :chat:

 

[mastertek2000]

it is a great seat and i love it but not correct for the money this thing should be point on the stock seat was killing me and reason for get the Corbin was getting ready to do mass to Chicago round trip

 

[docdoru]

Like previously posted, when spending this kinda $$ on a custom product, you expect the quality & workmanship to be better than what you have recieved...

:agree: and I would ask the same for a 30K bike too....

 

[Bob Denman]

Soooooo... Have you contacted Corbin yet? What did they say??

 

[mastertek2000]

Soooooo... Have you contacted Corbin yet? What did they say??

waiting for 9 AM today

 

[Bob Denman]

Thanks! I'm sure that we'll be interested in their response... Good Luck! :thumbup:
Anybody can have an off-day; it's how issues get resolved that truly measures the qualities that a company has.

 

[mastertek2000]

just called Corbin guy i dealt with is not in till tomorrow i will call back then i like to deal with one 1 person that way all facts stay correct will post tomorrow

 

[Y Rider]

I have a similar Corbin seat for our RT Limited. After a few months of use the spider web stiching started to come loose in a couple spots. There is a one year warranty so during the winter months I shipped it back to Corbin at their expense. They recovered the seat and it looks great again. It only took a couple weeks before it was returned. Other than the stiching I am very happy with the quality of the seat and their service. I just hope it holds up for a few years.

 

[mastertek2000]

well just got off the phone with Corbin and they where real understanding and very sorry that i was not fully happy with my seat here is what they are going to do it will take 4 to 6 weeks to get a new one i will get to keep this one till i can the new one will keep you posted on this as i get my new one
so far i would have to say they try to keep there customers happy

 

[Machinegunner]

My wife Frenchie and I have very early Corbin bags. Two years ago we tried to get bags warrantied for various reasons. Mike was in the process of selling the business and service was out of the question. Last year in Sturgis we met Sergio at Corbins display. Talked to him and then latter that day to Mike. They decided to warrant both sets of bags as soon as the riding season was over. We returned them and have since recieved and installed them. They look better than ever. Mike said he decided not to sell the company and now the great service is back. I'm sure the company and customer service will continue to grow. The bags and fairing are number one in our book. Thanks for the great service Mike. Hope to see you and Sergio in Sturgis this year.