New SpyderLover sponsor- Roadster Renovations

[ARtraveler]

Good luck in your new venture. I may be interested in the gloves, too. Do they come in various sizes, or are they one-size only?

The description from Amazon (where the site directs you), shows them in XL. Don't know if this is a limited supply, or close out special.

I need mediums.

 

[Roadster Renovations]

I did not see a size thing either--which is why I held off today. Site not working perfect? I have a couple months before the summer is upon us anyway. :roflblack:

I actually only listed the glove as one size. Send me a PM with your name or note on the order what size you wish. I will say this; the gloves are well made with good leather and good stitching. The gel is just enough to not overwhelm, yet substantially cut down road vibration. Before I offered these gloves, I used them for our NE Vacation and we rode 4,400 miles in 11 days. I had no hand cramping at all. The longer I have worn them the more fitted to my hands they have become. I think you will really like them. btw: Just saw your post and I think the Large will fit you fine. What size (generic) gloves do you normally wear? Also, do you have a lowes or menards anywhere close. You can find the correct size, send a picture of the pair and I can check them here. Just remember, these gloves run very small.

 

[Roadster Renovations]

Thanks Doc! Please let us know when you have the aluminum ones ready for sale. One quick question that I do have though. On most trailers the 'tongue weight' is only around 17-20 pounds. Since these carriers have a capacity or either 40 or 60 pounds, I would be concerned that using it could void my Can-Am Factory Warranty. Your thoughts please!

PS - Welcome to town!!!

The aluminum carrier is being configured for fabrication as we speak. I should have some numbers in the next week or so.

 

[Roadster Renovations]

Thanks Doc! Please let us know when you have the aluminum ones ready for sale. One quick question that I do have though. On most trailers the 'tongue weight' is only around 17-20 pounds. Since these carriers have a capacity or either 40 or 60 pounds, I would be concerned that using it could void my Can-Am Factory Warranty. Your thoughts please!

PS - Welcome to town!!!

OK, I have the BRP service manual and the tongue weight is 40 lbs. If we can get the carrier down to 10 lbs. that 30lbs. would be a bunch of stuff indeed. One other factor to consider is that the 40lbs is directly at the farthest point right on the ball. The carrier will have a larger contact area as well as being shifted forward. This will undoubtedly spread the load. Hope that helped. Sorry my initial information was wrong on the tongue weight. I will update more when I have more info on the carrier.

 

[flaggerphil]

The aluminum carrier is being configured for fabrication as we speak. I should have some numbers in the next week or so.

That would be great! I am very, very interested in the carrier!

 

[Roadster Renovations]

Those of you that were interested in the gloves, here is what I am willing to do. If you PM me with an email I can invoice through Pay Pal I will knock off the shipping. That way if they do not fit you will only be out the return shipping and get a full refund minus that. Please specify Large or Extra Large for the size you want sent. Hope that helps!

 

[IntoTheWind]

Just received my small mirror ordered on 01/05/15, "Happy wife, Happy Life".:shemademe_smilie:hyea::yes:

 

[Roadster Renovations]

Just received my small mirror ordered on 01/05/15, "Happy wife, Happy Life".:shemademe_smilie:hyea::yes:

That's awesome! I, too now have a happy wife because of that top case mirror!