New owner of a 09' Spyder

[jedd]

:congrats:welcome:2thumbs::firstplace:

 

[ataDude]

welcome :congrats: Nice paint!

 

[Midnighthog]

I might do that Toy thanks......any certain kind you have a link to that you would recommend....?

 

[NancysToy]

I might do that Toy thanks......any certain kind you have a link to that you would recommend....?

Since you already have the 1" riser, I would go with the NoMagicNeon 3" risers. Call Evan to verify the application and discuss options. Their ad is listed with the sponsors on the SpyderLovers home page. Great folks to work with! There are also many posts about the risers, and pictures, here on the forum, including some installation threads, as I recall. Search for "NMN riser".
-Scotty

 

[Bersquack]

:congrats: and welcome

 

[DannyS]

Looking good I like the contrast with the Silver Screens

 

[jima1153]

Sweet!!!:congrats:

 

[northramp]

Welcome..That sounds like a great force on the job.....They all ride!!welcomewelcome

 

[irish2themax]

I had therapy for a ruptured discs and have had back issues ever since and sitting in the squad all the time with all this gear on doesn't help the situation.

I have had two back surgeries and have back spasms frequently. But never as a result of the Spyder. I got the KewlMetal 5" pull backs and the ride is perfect for me

 

[Midnighthog]

Those might be a good idea for me....Do you have a link to where you bought them....On my Iphone atm but, I'll check it later....

 

[Lamonster]

I might do that Toy thanks......any certain kind you have a link to that you would recommend....?

http://www.nomagicneon.com/SpyderHandlebarRiserKits.html

 

[BigRock]

That's a freakin' awesome paint job! Congrats!!

 

[COOLMACHINE]

Nicely done!

Nicely done Midnight! :thumbup: I'm Jerry from St. Louis, MO. Welcome! :spyder:

 

[8LEGS]

:2thumbs: Sweet!

 

[orangespydiegirl]

Paint looks great, I also have back pain got the 4" risers from NMN and a corbin seat with back rest.:congrats:welcome

 

[Midnighthog]

I was at CowTown today having them install my new seat and 12volt outlet and the risers won't work with my riser I already have 3inch under the wheel...Not enough wire to reach the handlebars...O well...I bought a new seat I'll put the pictures on the first post of mine under my exhaust ones....Loving it....I'm gonna head to Spi Illinois tomorrow after I get my coats from UPS and my throttle lock.....On one of the pictures is me with my paintball jersey shirt on, that is what I had the guy paint on the bike, So i'll prolly be wearing that shirt as a momento when i ride......<Flex>:firstplace:

 

[NancysToy]

I was at CowTown today having them install my new seat and 12volt outlet and the risers won't work with my riser I already have 3inch under the wheel...Not enough wire to reach the handlebars...O well...I bought a new seat I'll put the pictures on the first post of mine under my exhaust ones....Loving it....I'm gonna head to Spi Illinois tomorrow after I get my coats from UPS and my throttle lock.....On one of the pictures is me with my paintball jersey shirt on, that is what I had the guy paint on the bike, So i'll prolly be wearing that shirt as a momento when i ride......<Flex>:firstplace:

Wasn't aware that BRP offered a 3" riser now. We have their 1" riser, and I thought that was all that was available. New introduction? The NMN risers will work with their 1" for most Spyders, but the wires and cables may need to be rerouted to reach.
-Scotty

 

[Midnighthog]

Not sure, it's a silver block that goes under the handlebars to raise it up 3 inches....then of course you can get the risers for the billet handles.....

 

[jvicker]

welcome AWESOME paint job. Will they let you take it out on patrol?

 

[bjt]

Not sure, it's a silver block that goes under the handlebars to raise it up 3 inches....then of course you can get the risers for the billet handles.....

Either BRP has come up with a different riser or your shop has put some other riser that works in your Spyder. The standard BRP riser is one inch taller than the stock handlebar mount and its made of the same cast metal, black or dark gray in color.