I bought a set of armrests for my can am and was planning to install them myself. No instructions were included. You tube was no help, evidently brp changed the design in the last couple of years. It looks like you have to remove the bags to mount the brackets. It looks to be a major job. I need some advise on this. I’ve been mechanicing for 60 years but this one has me stumped. Any advise is appreciated.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Need instructions on installing Factory armrests 2021 Sea to Sky
- Thread starter 66ranger
- Start date
wtrskinut1
New member
It is actually pretty easy. Here are the instructions. Here is a link to the instructions. https://instructions.brp.com/e-inst...343162-902012108.1615977719#tab=2&val=armrest
Wmoater
Active member
Agree. It was the first thing we did on dads new RT. The hardest thing was the removing the little plastic plate around the controls. It has a tab on the front and side. Just use a little pointer screwdriver like a 1/16 blade and pop the corner. Once both plates were removed simply bolt on. Its actually much easier than the Pre 20’s series. It the second link in the the instructions posted.
Motorcycledave
Active member
In looking at your post here in the GS/RS/RSS part of the Spyder Lovers Forum asking to install FACTORY ARMRESTS on your Spyder
I have bad news for you and good news, CanAm NEVER made or sold armrests for that model. The GS/RS/RSS & ST's have been discontinued and have been for some time, locating parts for them is a challenge however I can supply you with after market arm rests to fit those models. The armrest you have are for an RT or maybe the F3 not the one you have.
Should you like to contact me here is my information
[email protected] 209-887-3283 9:00AM to 8:00PM daily Pacific Time.
Moved this thread asking for installation instructions for a 2021 Sea to Sky (F3? Or RT? :dontknow: ) into Spyder General Discussion. :thumbup:
Similar threads
