• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Need help please

GPrice

New member
I have a 09 gas.I had to install a new oil pressure sensor today.Removed old one put new in but it wouldn't tighten.Looked at old one and you could see where the threads came out.Would a heli-coil work or any other ideas that would work. Thank you
 
Helicoil..!!

This will work but the trick is tapping the hole to insert the coil. I have found greasing the tap and backing it out often to clean the metal particals off helps them from getting into the system. Did many a spark plug this way so as not to have to remove the head. Its your call good luck..!! :thumbup:
 
The one thing I'm worried about is the metal shavings I just don't know what else I can do.Any ideas that would work better.
 
Back
Top