Neck & Shoulder Pain Resolved

[papanorm]

Just wanted to share:
I have been trying to resolve this issue with different handlebar positions and finally tried https://www.revzilla.com/motorcycle/rox-2-pivot-risers-for-1-18-handlebars rather than BRP’s short reach bars. Long and short of it - it worked. The install was very straight forward and without issue. And there was plenty of cable to allow the mod. Just a couple of extra zip ties.

 

[SpyderAnn01]

That’s a nice option and cheaper than the optional handlebars.

 

[Old Man Grizz]

Risers

Good Morning World!
i was wondering what type Spyder You installed these on?
They look like just what I need and it sounds like You really like them.
Thanks,
Old Man Grizz

 

[BigGuy66]

Handlebar mod on your Spyder

Just wanted to share:
I have been trying to resolve this issue with different handlebar positions and finally tried https://www.revzilla.com/motorcycle/rox-2-pivot-risers-for-1-18-handlebars rather than BRP’s short reach bars. Long and short of it - it worked. The install was very straight forward and without issue. And there was plenty of cable to allow the mod. Just a couple of extra zip ties.

Can you post some pics so we can see how we can do this? I need to modify mine as well....
Jim

 

[papanorm]

I have a 2016 F3L and will post pictures shortly.

 

[ARtraveler]

Thanks for the information. Will be looking forward to some pictures. :yes::yes:

 

[papanorm]

Here are some pictures from the handlebar riser install. I’m pleased that the stock look is retained but a lot more adjustment has resulted.

 

[asp125]

I discovered ROX risers from the adventure touring crowd. My fiancee was having neck and shoulder pain on her bike (FZ6R), and pulling the bars back and up cured it.

 

[papanorm]

Sometimes an inch or two of bar placement can make all the difference. BTW I notice that i have to lean more than i used to on turns with the bars being closer. :thumbup:

 

[ofdave]

Good Morning World!
i was wondering what type Spyder You installed these on?
They look like just what I need and it sounds like You really like them.
Thanks,
Old Man Grizz

it's in the F3 thread, I bet it was an F3

 

[gnorthern]

Just wanted to share:
I have been trying to resolve this issue with different handlebar positions and finally tried https://www.revzilla.com/motorcycle/rox-2-pivot-risers-for-1-18-handlebars rather than BRP’s short reach bars. Long and short of it - it worked. The install was very straight forward and without issue. And there was plenty of cable to allow the mod. Just a couple of extra zip ties.

When you say "short reach," are you saying you used these as an alternative to the handlebars for tall people? I'm waiting until I get a new seat, but I want some radical adjustments on my handlebars. The longer bar for the brakes was a huge help.

 

[papanorm]

My understanding is that the short bars are for people that need a longer reach. I went with the ROX mod because it had more adjustment than just the bars. I have a Mustang seat and backrest that complete the setup.

 

[Little Blue]

RTL Bar

:banghead::banghead: Definitely Not a Go on my 2016 RTL. Not the same set up and or bars. :gaah::gaah: Still looking :chat:

 

[quasi]

:banghead::banghead: Definitely Not a Go on my 2016 RTL. Not the same set up and or bars. :gaah::gaah: Still looking :chat:

what I did on my RT-S was a set of RSI 5" risers along with 2 pieces of 7/8" steel rod 4" long. the steel rods attach to the existing grip locations and the risers mount to the rods. I had to extend my wires and also install a longer clutch line. but I think with a set of 3" risers I would not have had to extend the wires or the clutch line.

 

[Old Man Grizz]

2009 GS

Good morning folks
So I’m wondering if anyone has tried these, or would they work on a 2009 GS?
Thanks
Old Man Grizz

 

[Pirate looks at --]

:banghead::banghead: Definitely Not a Go on my 2016 RTL. Not the same set up and or bars. :gaah::gaah: Still looking :chat:

Look into the BRP Tri-Axis bars, they should work for you. Pricey, but better than being uncomfortable!