• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

My buddy has a stuck gas cap...

Bluehole

New member
it is a 2012 RS and he says the cap will only click when trying to take it off. I had seen on here a stant replacement # but all searching has produced nothing. General idea for getting the cap off is a lot of side pressure from anything that is big enough to grab hold of the sides, I think?????

Any help would be most welcome,

Thanks
 
Bad cap

Drive 2 sheet metal screws into it and remove it. It is junk, anyway. Channel locks big enough are over 100 bucks. Any questions, call. Joe
 
I have had this happen, and I have pushed down on the cap, and also pulled up on the cap to get it to come off. Not saying that this will work, but it did for me. Either way, I would have a Stant cap ready to put on when they finally get the cap off.
 
Here you go

it is a 2012 RS and he says the cap will only click when trying to take it off. I had seen on here a stant replacement # but all searching has produced nothing. General idea for getting the cap off is a lot of side pressure from anything that is big enough to grab hold of the sides, I think?????

Any help would be most welcome,

Thanks

Advance Auto parts is 10835 & 11835 at Pep boys. The cap is smaller but seems to fit well enough. I've been using this cap 2 years now without any problems. Good luck getting the old one off.
 
First off I hope your friends gets the gas cap off. Question : Is there certain years of the Spyder that are effected or is it all gas caps that are on the Spyders. I had a 2012 and now a 2015 RTS and haven't had any problem removing the gas cap.
 
First off I hope your friends gets the gas cap off. Question : Is there certain years of the Spyder that are effected or is it all gas caps that are on the Spyders. I had a 2012 and now a 2015 RTS and haven't had any problem removing the gas cap.

It's the gas cap that was, ironically, supplied as a recall in Jan 2013. The one before that had problems with gas vapors after a ride, particularly on a hot day. So your 2012 probably has the recall gas cap which is the one that then fails at some point. Mine failed at a petrol station and it took me 10 minutes to get the cap off, I put it back loosely but it still took another 20minutes to remove it when I got the replacement. Whether you have the pre or post recall one on your 2012 I'd recommend replacing it with the Stant.
 
OK then :-) A trip to Pep Boys now is better than the hassle at a gas station.
Thanks for the thread and replies ya'll.
 
Tighten till clicks.. etc... etc... etc...

On Facebook there have been a rash of people with this gas cap failure!

Seems recently the gas caps and the "click mechanism" has been failing...

Bob
 
I only used one click and so far no problem. Thank you to all who gave and shared their experiences how to remove the failed gas caps. This is a big help to anyone who may need.
 
First off I hope your friends gets the gas cap off. Question : Is there certain years of the Spyder that are effected or is it all gas caps that are on the Spyders. I had a 2012 and now a 2015 RTS and haven't had any problem removing the gas cap.
I had a 2012 RTS-SE5 A/C and had got a New gas cap( due to the recall) and now I have a 2014 RTS-SE6 no problems with the gas cap. Deanna
 
Back
Top