-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
murdered out.
- Thread starter michaelfrmtx
- Start date
TheEmissaryDS9
New member
That's Great
You did a great job. Make it your own.
No two Rykers should be alike!
:doorag: :thumbup:
You did a great job. Make it your own.
No two Rykers should be alike!
:doorag: :thumbup:
sKiZo
New member
The black ones ARE faster, right? <G>
Was thinking of doing some with gravel guard paint like they use on lower car panels. Gives you a naugahyde like finish with three or four light coats (with some practice), somewhere between semi-gloss and satin if you leave it raw.
And of course you can paint that if you like using a factory color ... have to look two or three times to catch that.
Was thinking of doing some with gravel guard paint like they use on lower car panels. Gives you a naugahyde like finish with three or four light coats (with some practice), somewhere between semi-gloss and satin if you leave it raw.
And of course you can paint that if you like using a factory color ... have to look two or three times to catch that.
If you murdered out your Ryker you need to put these on so we know "click: https://www.amazon.com/TOMALL-Simulation-Stereoscopic-Decorations-Accessories/dp/B0823XZSTM/ref=sr_1_12?dchild=1&keywords=bullet+holes&qid=1615763465&sr=8-12 :joke:
3WheelFred
New member
Michael - I look your look! I was almost going to go with a 900 over the Rally edition just b/c I liked the all black look better, but I like your solution better - get the Rally and then black it out.
Do you still have the standard silver accent Rally rims too or did you black those out too? and if you did, how'd you do it?
Do you still have the standard silver accent Rally rims too or did you black those out too? and if you did, how'd you do it?
michaelfrmtx
New member
haven't messed with the rims yet.powder coating would be the best way but a bit labor intensive.took off the rally belly pan to see the bottom better and chase a tiny oil drip.damn wiring is ty wrapped and routed thru it.got it though.now its a couple minutes and 5 push pins and its off or on.
MNRyker2131
New member
Looks great! How did you paint it and is it holding up well?
Thanks
Thanks
michaelfrmtx
New member
I'm not the best painter, specially with spray cans.i had a tiny run on the trunk piece.so far its holding up.if it flakes or peels,i'll just shoot them again
Similar threads
