SPYDERFUZZ
New member
Got the mirror off. How do we get inside to install the arrows to the back side of the mirror. And once inside what hold the arrows to the mirror?
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Mirror
- Thread starter SPYDERFUZZ
- Start date
johnwinslow
New member
you are on your own taking it apart we threaded the wires with a shop vac on the hole where the wires come out,and a piece of string, and did the splice out side the mirror place the arrows close to the edge of the glass.
SPYDERFUZZ
New member
John
I guess I am looking more stupid by the minute. Are you saying that arrow unit itself goes on the outside of the mirror? If it did how would you use the mirror in the day time if you put it on the outside? I know that sounds dumb. I am blaming it on the Vicodin. My morphine pump stopped not working and I am stoned (well almost). Dr can't find out what is going on.
jcthorne
Well-known member
The LED arrows go on the back of the mirror glass. You have to remove the mirror from its backing using a heat gun, a paint scraper and patience. Once off, clean the old adhesive, attach the LED module and reattach the mirror to the housing using 3M mounting tape. There are whole threads on here with photos of the process.
Similar threads
