Looking for Saddlebag mounts to fit 2008 Spyder RS Please! Saddlebags too

[MoDZuKi]

Anyone have a set of saddlebag supports for a 2008 RS - I would KILL to get a set of YELLOW bags also.. Or in reality any supports made for the RS.. Anyone have PLANS how to build or how the supports are attached?.. I Can make a set - Just cant wrap my head around how the heck to attach supports..
Cheers
Dave

 

[cptjam]

Try Corbin. I have seen RS models with their bags.

 

[oldgoat]

I looked at Twisted Throttle and 2nd-gear (the latter an online supplier of all things Givi in Canada). The PLX770 side case racks are no longer available.

 

[BLUEKNIGHT911]

Anyone have a set of saddlebag supports for a 2008 RS - I would KILL to get a set of YELLOW bags also.. Or in reality any supports made for the RS.. Anyone have PLANS how to build or how the supports are attached?.. I Can make a set - Just cant wrap my head around how the heck to attach supports..
Cheers
Dave

I and others have purchased " Mutaza " brand bags ( with mounting racks ) on E-bay ( $ 250.00 +/- delivered ) there is some great info and pics in the Archives, on this specific bag...… Mike :thumbup:

 

[ARtraveler]

Try Corbin. I have seen RS models with their bags.

YUP! Those early RS with the Corbin bags were very sharp. $1,500 was pretty steep for bags back in those days.

 

[Bfromla]

I and others have purchased " Mutaza " brand bags ( with mounting racks ) on E-bay ( $ 250.00 +/- delivered ) there is some great info and pics in the Archives, on this specific bag...… Mike :thumbup:

:agree: DIY can pay off got a bud put some brand on his wife's '13ST here's the info he shared about it: I got them off E bay. But. Here is the link to the actual store they come from. http://m.siriusconinc.com/products-detail.php?product_id=6870 The saddle bag part no - 56-9991. The mount bracket part no 16-2933. These are for her 2013 STS. You need to make sure of correct parts for his Model. Then there was this for F3 :
http://www.spyderlovers.com/forums/showthread.php?87516-My-1186-dollar-luggage

Hope that will help:thumbup:

 

[bscrive]

Check these out. They say that they come with brackets made for the RS.

https://www.ebay.com/itm/Saddlebags...dster-RS-ST-w-mounting-brackets-/202517360574


Here is a set of yellow Givi bags. Sorry, not mounting hardware.

https://www.lebagagistemoto.com/val...iviv35ntfl-lebagagistemoto-8019606189899.html

 

[Motorcycledave]

GIVI IS THE COMPANY THAT MAKES THEM FOR BRP AND OTHERS
they will be able to supply them and the mounts.

Anyone have a set of saddlebag supports for a 2008 RS - I would KILL to get a set of YELLOW bags also.. Or in reality any supports made for the RS.. Anyone have PLANS how to build or how the supports are attached?.. I Can make a set - Just cant wrap my head around how the heck to attach supports..
Cheers
Dave

 

[ARtraveler]

GIVI IS THE COMPANY THAT MAKES THEM FOR BRP AND OTHERS
they will be able to supply them and the mounts.

YUP! I had GIVI's on both the 2008 and 2009. Saved about $500 over the Corbins. :thumbup:

 

[oldgoat]

I don't think Givi makes them anymore.

 

[asp125]

Givi discontinued the mounts years ago for the Spyder RS. I was able to find a used set of PLX770 mounts on eBay. The bags themselves are identical to the BRP bags (actually Givi units rebadged). If you're handy with welding and bending rods, you could order or buy a used mounting rack for any bike, and weld on the attachments. If you're interested, PM me and I can take a few photos of my setup to give you a rough idea how its attached.

 

[oldgoat]

So, where's the OP?

 

[MoDZuKi]

Im here.. Just been travelling last few weeks.. thanks for the replies.. im in Canada so a lot of these links won't ship to Canada.. I have a set of semi rigid bags im trying to mount thus the bag supports.. yeah its tough to mount stuff on these as theres no real connection points!

 

[MoDZuKi]

I am very handy and can make my own supports yes.. but I would love to see how yours are mounted Thank you! It would be a great head start in seeing how they are actually mounted and the positioning.. so hopefully I can get it right!