Looking for a Spyder key cover with a hole?! Any ideas?

[Mike0123]

Good morning,
Looking for a key cover with a hole. I see the one from valueaccessories and LaMonster, but are there any other choices or ideas?
Looking for a red one - or two - possibly.

Thanks

 

[BeRight]

Amazon has a bunch

 

[JayBros]

Motorcycle Dave, a SL sponsor.

 

[MNBK]

If you go to Amazon and type in Red Can AM Spyder Key Cover it will show you several items. Look for the one by Crazy MetalMan, it shows up in red. My wife and I each have that style for each of our F3's. They work great

 

[troop]

If you go to Amazon and type in Red Can AM Spyder Key Cover it will show you several items. Look for the one by Crazy MetalMan, it shows up in red. My wife and I each have that style for each of our F3's. They work great

Damn ... They jumped up $10 from when I bought mine from them last year Still, it's a nice piece...

 

[jcthorne]

Just poke the hole and put the key you have on a ring.

 

[PW2013STL]

Just poke the hole and put the key you have on a ring.

And if you poke the chip in the key it will only cost you about $80 for a new key!

 

[Mikey]

You may find one on Ebay!!

 

[Possible]

Key rings just mess up the area around the ignition. I've never used a key ring, and only lost one key. And that was when I took it out of the ignition and
dropped it down into the engine area, and was never seen again.

 

[Mike0123]

Key rings just mess up the area around the ignition. I've never used a key ring, and only lost one key. And that was when I took it out of the ignition and
dropped it down into the engine area, and was never seen again.

Hmmm... good point.

 

[Mike0123]

If you go to Amazon and type in Red Can AM Spyder Key Cover it will show you several items. Look for the one by Crazy MetalMan, it shows up in red. My wife and I each have that style for each of our F3's. They work great

Wow that is a work of beauty. Too much for me right now, but that’s the ticket!

 

[JayBros]

Key rings just mess up the area around the ignition. I've never used a key ring...

I heartily agree.

 

[Motorcycledave]

Good morning,
Looking for a key cover with a hole. I see the one from valueaccessories and LaMonster, but are there any other choices or ideas?
Looking for a red one - or two - possibly.

Thanks

Here you go a 2 pack for only $18.95
I have plenty in Stock
Give me a call 209-887-3283 7 Days a week Pacific time

 

[Gekko]

Good morning,
Looking for a key cover with a hole. I see the one from valueaccessories and LaMonster, but are there any other choices or ideas?
Looking for a red one - or two - possibly.

Thanks

Under "other choices": LaMonster shows how to drill the stock key and miss the chip too: https://www.youtube.com/watch?v=tFmAHsv5JmA

 

[japgen]

I just looked at the Crazy Metalman holder on Amazon, and it seems it does not fit a 2020 RTL key.
FYI

 

[jcthorne]

And if you poke the chip in the key it will only cost you about $80 for a new key!

the place where you poke the hole through the rubber is a long way from the chip. The hole is already in the key frame, just covered by rubber. Have done many of these for customers and not replaced a single key.

 

[RogDawg]

Boom! Done! $25 not spent.

 

[bigbadbrucie]

Why tKe the chance? Motorcycledave is a sponsor on this site, and has exactly what you need. Sure you can drill a hole, but if you screw up, That key is toast. Why take a chance?

 

[SgtRay]

If you go to Amazon and type in Red Can AM Spyder Key Cover it will show you several items. Look for the one by Crazy MetalMan, it shows up in red. My wife and I each have that style for each of our F3's. They work great

Lol I didn't even know I wanted it until I went and typed in what you said. I bought it immediately. Can you see the future? Lol

 

[AdmiralS]

I just looked at the Crazy Metalman holder on Amazon, and it seems it does not fit a 2020 RTL key.
FYI

Fits my 2020 Key no problem! Highly recommend!