• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

LH LED Headlight turned 45° in socket after install - any fixes?

I have read your posts and I think sometimes a person can worry a thing to death! Put the things in and get them somewhere close to where you think they should be, and ride it in the dark and see how it hits the road. Get out of the garage and try them out, you may like them. I put a set of Lamonster in my 2012, but those are a projection style light, and they were preset at the shop for me. Put them on the road!
 
I don't know how helpful this will be but here are pics of how my Lamonster LEDs are installed in my F3-S. They are not 100% vertical.
 

Attachments

  • 20240513_161223.jpg
    20240513_161223.jpg
    23.4 KB · Views: 13
  • 20240513_161239.jpg
    20240513_161239.jpg
    17.6 KB · Views: 11
I am planning on having SpyderPops replace my headlights and foglights with LEDs during this weekend's Hot Springs rally, and he seems to only carry Lamonster's. I hope this is not going to be an issue for me. Before planning this trip, I was going to go with the TricLed 360's from somewhere else.
 
I just installed Lamonster's LED headlights on my '23 F3L. I definitely was not careful somewhere, because I ended up with the LH bulb turned 45 degrees clockwise from TDC. I’d appreciate suggestions on how this can be corrected. I’m sure I have to at least pull off the LH plastic again, Grrrrr, but I’m a little stumped. I’ve also sent a note to Lamonster. All help appreciated. I suppose there’s no quick fix…
Bruce

Not sure if you corrected your problem yet... I'm installing a set of LEDs on my F3 from Slingmods.

The video they have posted for the Elite 360 installation, shows that the LH bulb wire harness needs to be positioned at 7 o'clock and the RH bulb harness at 5 o'clock.

Not sure if there is an installation video somewhere of the LEDs from Lamonster that you could reference for positioning in the socket?
 
Last edited by a moderator:

And it wasn't. Daniel from BajaRon did mine all four of mine at SpyderPops in less than an hour (and did the left foglight by feel alone!) and all look great, with a good pattern! Love the brighter, white light. Yellow is so yesterday.
 
Back
Top