-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Laser Alignment
- Thread starter Grayfox
- Start date
I did and was not satisfied that they really knew what they were doing after watching them do the alignment in early April this year. Had Squared Away check my alignment about three weeks later at Spyderfest and they found it out of alignment and also found one tie rod check nut only finger tight...not good.
I imagine Honda of WS has done a bunch of alignments since April thus have gained more experience. Some folks have posted here about Brewer Cycles in Henderson doing their alignments and were pleased.
Good luck.
AZCowboy
New member
I had it done in Las Vegas, NV and they did a great job but they had to do it twice. The first time I took it out an it didn't pull to the left but if I took my hands off it drifted to the left. They also tried it and found the same thing. They did it again and adjusted it another 1/8 inch now it is great. My tire wear was nill but it was out a total 3/4 inch on the left tire. So when they do it take it for a ride and find a level place go 40+ mph with hands off. I did it on 3 different roads, 1 drifted left, 1 drifted right and the last ran center for a long distance. So find out up front if you can do this and if it is drifts will correct it.
I love it now that it is done. In a way you may say it saved my life. REJ:spyder2::yes:
