• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Laser Alignment

Well tomorrow is the day it all starts. I mentioned it before but come as early and stay as late as you like. Talked to a buddy of mine and he is going to video the whole thing to put on the forums later so it would be cool to have y'all hang out. Also, had another member join this morning and now have only one spot left, 4pm tomorrow.
 
5PYD3R said:
No problem. Was a bit more than I thought but don't regret it at all. Look forward to meeting everyone
Click to expand...


Jordan did one heck of a job and I hear there will be some red hot food too...hope you get some red hot weather !!!

A big shout out to Mary down at OUTLAW headquarters...doing lot's of e mails and paperwork to make sure the next 2 days run SMOOTH

You Bay City folks are in for a REAL treat with Stormin Norman Robinson....he's a good align tech... He was a salesman for BRP for 20 years and loves to tell stories..(LOL)
ENJOY and can't wait for the smiling faces....:yes::yes::yes:

 
Last edited:
Heading up

I will be riding up tomorrow. I'm leaving Athens around 10. Heading north on 66 to M78 through Bellevue. Then North on 69 to 75. Then north on 75 until I have to get off. Should be in Bellevue around 11 or so. I should be to Jordon's house around 1 or so. See y'all tomorrow. My wife will not be making the trip. She fell about 7 weeks ago and broke 2 ribs. It has been slow healing because she makes progress during the week but on the weekend we do stuff and by Monday morning she is in pain. So three hours on the bike right now will not be good for her. She is a bit disappointed.
 
rhansen309 said:
I will be riding up tomorrow. I'm leaving Athens around 10. Heading north on 66 to M78 through Bellevue. Then North on 69 to 75. Then north on 75 until I have to get off. Should be in Bellevue around 11 or so. I should be to Jordon's house around 1 or so. See y'all tomorrow. My wife will not be making the trip. She fell about 7 weeks ago and broke 2 ribs. It has been slow healing because she makes progress during the week but on the weekend we do stuff and by Monday morning she is in pain. So three hours on the bike right now will not be good for her. She is a bit disappointed.
Click to expand...


Sorry to hear about your wife but look forward to meeting you tomorrow. We had a great time today and actually look forward to a full day tomorrow meeting everyone.
 
I won't be coming. Spyder overheating/lost radiator fluid!

Hello all,
I apologize for the late notice but I won't be able to come Saturday for my alignment appointment. My new Spyder with only about 100 miles on it decided it wanted to lose all its radiator fluid and overheat. I barely made it home tonight without seizing the engine!
Contact those in charge of this event if you want to take my place in line for the alignment. Also found out that apparently my selling dealership lied about owning this laser alignment system they do as part of dealer prep.

Take Care!

Andy.
 
rhansen309 said:
I will be riding up tomorrow. I'm leaving Athens around 10. Heading north on 66 to M78 through Bellevue. Then North on 69 to 75. Then north on 75 until I have to get off. Should be in Bellevue around 11 or so. I should be to Jordon's house around 1 or so. See y'all tomorrow. My wife will not be making the trip. She fell about 7 weeks ago and broke 2 ribs. It has been slow healing because she makes progress during the week but on the weekend we do stuff and by Monday morning she is in pain. So three hours on the bike right now will not be good for her. She is a bit disappointed.
Click to expand...
Sorry to hear about the fall and the ribs. I did the same about that same time. It isn't fun! Give her our best.
 
I was off

I was off about 3/4 of an inch looking at the lines they had on the targets. A few adjustments and a I had a nice smooth ride home. Thanks Jordan for putting this together.
 
Mine was spot on the right side and off an inch on the left side. After adjusting that and then setting the toe in and recalibrating the DPS it went down the road like a dream.

Thanks Norman and Jordan.
 
KAPike said:
Mine was spot on the right side and off an inch on the left side. After adjusting that and then setting the toe in and recalibrating the DPS it went down the road like a dream.

Thanks Norman and Jordan.
Click to expand...

We have seen quite a few 2014 that are like yours, okay on one side and off on the other, but so far we have not seen any Spyder that was spot on.
 
I really debated doing this, I've been very happy with the handling and tire wear. After Norman and Jordan did their magic it was very evident the Spyder was a better ride. It's almost like they boosted the power steering because the steering took a lot less effort and cornering was smoother.
 
It was an absolute blast. I am so happy that everyone that needed the alignment noticed the difference and was beyond thrilled! Mine was the first one done and I was so happy with my test ride after it was done I didn't want to come back, I just wanted to keep riding! Thank you to all who came, you were the ones that made this possible!
 
Thanks again jordan

Was not able to try mine out at your house because of brake problem but got home and tried to bleed front brakes again by taking off calipers and holding bleeder up higher and out come all the air! Took it for a ride and brakes work perfect without expense buds treatment with the new rolo front end aliment it feels like i just put power steering on it! Thanks again Jordan for having and feeding all of us!
 
You must log in or register to reply here.

Similar threads

QuasiMotard
Results from Can-Am/BRP engineer conference call
2
Replies
37
Views
8K
KID Ryker
KID Ryker
Paula(Butch2025)
July Ride Info
Replies
1
Views
2K
Paula(Butch2025)
Paula(Butch2025)
Lamonster
New Spyder event in East TN
2
Replies
30
Views
9K
armyspydervet
armyspydervet
bobgeorge
Laser Alignment Question
Replies
3
Views
2K
rcflyrj
R
Synthetic
Lamonster Garage Laser Alignment Review
Replies
16
Views
4K
hillybillyheaven
hillybillyheaven
Back
Top