Lamont's New Floor Board Hwy. Pegs Pics

[Tango]

Finally figured how to post pics . Again.

 

[sddinnh]

Those look pretty "spiffy". :thumbup:

 

[Tango]

Install was easy. Once I bought a set of composite ramps. :thumbup: Raised the Spyder up just enough. hyea: Tom :trike:

 

[bcoulter19]

2 questions
1) did you put those on a 2013 ?
2) Where can you go to purchase them?

Thanks,

Bill C.

 

[Tango]

2 questions
1) did you put those on a 2013 ?
2) Where can you go to purchase them?

Thanks,

Bill C.

2014
Bought them from Lamont. Look on the main page of sponsors. :thumbup: If the 13's floorboards are the same as the 14's. Your good to go. Tom :trike:

 

[Shana]

highway pegs

Did you have to drill any holes to put these on? His is a 14 from his picture.

 

[Tango]

Did you have to drill any holes to put these on? His is a 14 from his picture.

Two holes on each floor board. Clamp the bracket on first to position it. Then drill from underneath. I used a small bit, then the larger bit. Also bought a set of ramps to pick the Spyder up. :thumbup:

 

[Lamonster]

Glad you got them on. Don't forget to put your caps on.

Here's the install instructions http://lamonstergarage.com/installation-instructions/fbb-install.html

 

[Chupaca]

Nicely done..!!

Looks great. The mounting system when floorboards exsist is nice. Nice quality on the hardware..congrats..!! Now go out and stretch..!! :thumbup:hyea:hyea:

 

[sjcpanther]

I'm wondering how easy these would be to install under a set of Inspector Gadget floorboards on a 2012 RT........ :dontknow:

 

[ARCTIC]

The only thing I dislike is that the bracket is held in position by only 1 bolt so it could rotate if you put a lot of weight on it. Are they powder coated or painted? If they're painted I could get a set and weld it where I wanted it and then powder coat them :dontknow:

 

[Lamonster]

The only thing I dislike is that the bracket is held in position by only 1 bolt so it could rotate if you put a lot of weight on it. Are they powder coated or painted? If they're painted I could get a set and weld it where I wanted it and then powder coat them :dontknow:

They are powder coated and they don't move when tightened, if they did I would of put a set screw in them.

 

[Lagaffe]

Niceeeeee !

I just ordered one set for my olds legs...

:yes:

 

[Bob Denman]

:2thumbs: